HTC Wildfire S CDMA Dead.... - GSM-Forum

Moderate · 02-21-2012, 09:31

Hi,

I have one HTC Wildfire S CDMA Version. ( PG76200 ).

Phone is new and was working condition and went dead while updating with ROM.Now can't enter it into boot loader mode.It is just vibrating two times when i try to power on and nothing else.

Can someone help me to revive it..?

Regards,
Moderate...

**legija** · 02-21-2012, 11:35

Hi,

Please contact me via Sonork, we will try to help You.

prestovivache · 05-17-2012, 10:12

And I have the same problem with wildfire s cdma.
Сan you help me?

Jacques2 · 10-14-2012, 17:33

I also have new HTC WildFire S (PG76200) on Virgin Mobile network. I am attempting to read memory. I attempted to connect via RIFF but get the following errors:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [HTC WildfireS V1.0.4522.55486]

Connecting to the dead body...OK
Detected dead body ID: 0x203E00E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC WildfireS family.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [HTC WildfireS V1.0.4522.55486]

Connecting to the dead body...OK
Detected dead body ID: 0x203E00E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x25010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

Quote:

Originally Posted by Moderate

Hi,

I have one HTC Wildfire S CDMA Version. ( PG76200 )
Phone is new and was working condition and went dead while updating with ROM.Now can't enter it into boot loader mode.It is just vibrating two times when i try to power on and nothing else.

Can someone help me to revive it..?

Regards,
Moderate...

ComandorUA · 11-13-2012, 11:27

There is a phone HTC Wildfire S cdma Virgin Mobile with a dead Bout (boot 3 times vibrate and boot,
but the light from the LED is on charge), please help-seeking full dump firmware or boot a Jtag or radio under it!
Please need help!!!!

**legija** · 11-13-2012, 11:53

Simply download updates, Wildfire S CDMA is supported.

ComandorUA · 11-13-2012, 12:12

please give a link to the update

**legija** · 11-13-2012, 12:14

Quote:

Originally Posted by ComandorUA

please give a link to the update

Box Service -> Check For Updates button.

insink71 · 06-17-2013, 17:05

thanks for making this resurrect lejita.. sidenote for those resurrecting a cdma wildfire s with a pre-made jig.. the TDO [circuit] is just a wee bit higher on A510c than on the GSM (A510e) wildfire s counterpart.. you can probably bend the pin and get it to connect.. or go the solder route. Just thought I'd mention it as it was the only thing that gave me a lil trouble.

Rob

02-21-2012, 09:31	#1 (permalink)
Moderate Freak Poster Join Date: Feb 2006 Location: India Posts: 452 Member: 232566 Status: Offline Thanks Meter: 150	HTC Wildfire S CDMA Dead.... Hi, I have one HTC Wildfire S CDMA Version. ( PG76200 ). Phone is new and was working condition and went dead while updating with ROM.Now can't enter it into boot loader mode.It is just vibrating two times when i try to power on and nothing else. Can someone help me to revive it..? Regards, Moderate...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Repaired dead phone without backup	Prodigal	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-29-2011 11:26
HELP Dead 5130 v5.00	N.Schmetz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	03-08-2011 04:51
help! Dead 5110 v5.30	aklishin	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	04-04-2001 11:56
nokia 5110 dead	alpha	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	02-28-2001 11:59
6150 V5.20 WANTED --- DEAD OR ALIVE --- IT'S BETTER ALIVE ! ;)))	tcamilo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	12-19-1999 22:30

02-21-2012, 11:35	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Please contact me via Sonork, we will try to help You.

05-17-2012, 10:12	#3 (permalink)
prestovivache Registered User Join Date: Feb 2004 Location: Ukraine Posts: 18 Member: 52576 Status: Offline Thanks Meter: 0	And I have the same problem with wildfire s cdma. Сan you help me?

11-13-2012, 11:27	#5 (permalink)
ComandorUA Junior Member Join Date: Nov 2012 Posts: 2 Member: 1838824 Status: Offline Thanks Meter: 0	There is a phone HTC Wildfire S cdma Virgin Mobile with a dead Bout (boot 3 times vibrate and boot, but the light from the LED is on charge), please help-seeking full dump firmware or boot a Jtag or radio under it! Please need help!!!!

11-13-2012, 11:53	#6 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Simply download updates, Wildfire S CDMA is supported.

11-13-2012, 12:12	#7 (permalink)
ComandorUA Junior Member Join Date: Nov 2012 Posts: 2 Member: 1838824 Status: Offline Thanks Meter: 0	please give a link to the update

06-17-2013, 17:05	#9 (permalink)
insink71 Junior Member Join Date: Feb 2012 Posts: 16 Member: 1720286 Status: Offline Thanks Meter: 1	thanks for making this resurrect lejita.. sidenote for those resurrecting a cdma wildfire s with a pre-made jig.. the TDO [circuit] is just a wee bit higher on A510c than on the GSM (A510e) wildfire s counterpart.. you can probably bend the pin and get it to connect.. or go the solder route. Just thought I'd mention it as it was the only thing that gave me a lil trouble. Rob