Huawei 2809 error - GSM-Forum

taturi1 · 07-21-2011, 13:07

Hello

I have Huawei 2809 with TATA logo and goes blue light, want to ressurect but gives this following error, what to do? plz help

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Huawei C2809]
Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected a Not Initialized FLASH1 Chip ID: 0x0000/0x0000 (16MB)
WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x00EC/0x257E
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

Thanks

lalitgvarshney · 07-21-2011, 13:27

Quote:

Originally Posted by taturi1

Hello

I have Huawei 2809 with TATA logo and goes blue light, want to ressurect but gives this following error, what to do? plz help

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Huawei C2809]
Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected a Not Initialized FLASH1 Chip ID: 0x0000/0x0000 (16MB)
WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x00EC/0x257E
ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

Thanks

Hi,
Seems It Will Be Hardware Fault, Huawei 2809 doest have 16mb Flash Chip,
Plz Check Hardware

WBR
lalitg

jaibalajitele · 07-21-2011, 17:51

there you see there is show
Detected a Not Initialized FLASH1

that why its flash damage so its hardware fault

07-21-2011, 13:07	#1 (permalink)
taturi1 Freak Poster Join Date: Oct 2007 Posts: 133 Member: 619982 Status: Offline Thanks Meter: 6	Huawei 2809 error Hello I have Huawei 2809 with TATA logo and goes blue light, want to ressurect but gives this following error, what to do? plz help Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.25, JTAG Manager Version: 1.33 Selected Resurrector: [Huawei C2809] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected a Not Initialized FLASH1 Chip ID: 0x0000/0x0000 (16MB) WARNING: No Data for the current NOR Chip. Selected default Data for the NOR Chip with IDs: 0x00EC/0x257E ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	12-12-2012 13:26
My 5110 v5.11 have a strange error.., it resets it self every 60second	luuk	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	24	08-11-2006 15:29
Avoid 3 times error code in Nokia 6185	X-plot	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-08-2000 20:24
The multiple errors of Winlock ... ???	Genata	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	09-20-1999 19:12
error (1002) simlock3.dll winopen	fondas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-28-1999 15:57

07-21-2011, 17:51	#3 (permalink)
jaibalajitele Freak Poster Join Date: Sep 2010 Location: in cdma/gsm field Posts: 253 Member: 1403437 Status: Offline Thanks Meter: 39	there you see there is show Detected a Not Initialized FLASH1 that why its flash damage so its hardware fault