I NEED tg01/Unlocked_EFS.rar TEAM - GSM-Forum

MARVZ_TG · 06-15-2012, 04:42

I NEED tg01/Unlocked_EFS.rar TEAM

Quote:

Originally Posted by legija

Hi,

You have different HW version there, and You need to use HTC HD2 DLL to write files manually.
If You need to unlock it, just write EFS file from here :

http://jtagbox.com/downloads/tg01/Unlocked_EFS.rar

If You need to repair phone, use full dump.

LINK HERE

MARVZ_TG · 06-15-2012, 05:04

Resurrection logs here

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Detected dead body ID: 0x202400E1

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

MARVZ_TG · 06-15-2012, 10:44

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x33010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

ERROR: Main data file size is less than requested to flash to main.

- Start address : 0x00000000
- Data Length: 0x00800000

Quote:

Originally Posted by legija

Ok, as i can see this phone is erased by ORT.

Download full backup from this link :
http://rapidshare.com/files/42229365...ull_backup.rar

Connect phone to RIFF, go to DCC TAB, select HTC HD2.
Open full backup, and set following options :

- Start address : 0x00000000
- Data Length: 0x00800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After this perform ROM upgrade using TG01 downloader.

MARVZ_TG · 06-16-2012, 11:54

hello TG01 AFTER WRITE FULL DUMP PHONE IS DEAD

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x37010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

Resuming write FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF on 0x000012200000
Completed in 00:17:27.063 (Average Transfer Rate: 516.37 kB/s)

**legija** · 06-16-2012, 12:07

RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB

MARVZ_TG · 06-17-2012, 03:14

Quote:

Originally Posted by legija

RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x37010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Detected dead body ID: 0x000000E1

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x000000E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

help sir ...........................

MARVZ_TG · 06-17-2012, 03:23

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - WRONG!!!
ERROR: Current ID does not belong to the Toshiba TG01 family.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC HD2 (Leo) family.

MARVZ_TG · 06-17-2012, 05:45

procedure help sir.............

Quote:

Start address : 0x00000000
- Data Length: 0x00800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After this perform ROM upgrade using TG01 downloader.

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x21010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

Looking for the RIFF BOX DCCLoader USB Interface Port...FAILED
The DCCLoader USB Interface is not found. Communication continues over the DCC Interface

ERROR: Main data file size is less than requested to flash to main.

Quote:

Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x23010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

ERROR: Main data file size is less than requested to flash to main.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	26	09-25-2012 02:41
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	6	11-29-2010 18:04
needed pinout for carkit(N61xx)	mobileinfo	Nokia Hardware & Hardware-Repair Area	1	12-27-2006 10:20
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	1	06-02-1999 16:23
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	05-26-1999 11:35

06-16-2012, 12:07	#5 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 44 Posts: 4,595 Member: 256342 Status: Online Sonork: 100.45940 Thanks: 130 Thanked 24,229 Times in 1,970 Posts	RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB

06-17-2012, 03:23	#7 (permalink)
MARVZ_TG Product Supporter Join Date: Mar 2009 Location: PHILIPINES-DAVAO DEL NORTE Age: 6 Posts: 1,477 Member: 990711 Status: Online Sonork: 100.1597405 Thanks: 2,107 Thanked 1,222 Times in 387 Posts	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [Toshiba TG01 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x000000E1 - WRONG!!! ERROR: Current ID does not belong to the Toshiba TG01 family. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [HTC HD2 (Leo) V1.00] Connecting to the dead body...OK Detected dead body ID: 0x000000E1 - WRONG!!! ERROR: Current ID does not belong to the HTC HD2 (Leo) family.