GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > RIFF Box Team > RIFFBOX

Reply
 
LinkBack Thread Tools Display Modes
Old 06-15-2012, 04:42   #1 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
I NEED tg01/Unlocked_EFS.rar TEAM


I NEED tg01/Unlocked_EFS.rar TEAM

Quote:
Quote:
Originally Posted by legija View Post
Hi,

You have different HW version there, and You need to use HTC HD2 DLL to write files manually.
If You need to unlock it, just write EFS file from here :


http://jtagbox.com/downloads/tg01/Unlocked_EFS.rar

If You need to repair phone, use full dump.
LINK HERE
  Reply With Quote
Old 06-15-2012, 05:04   #2 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
Resurrection logs here



Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Detected dead body ID: 0x202400E1
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x202400E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]




Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Wrong response code from the RIFF Box: 0x45
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.
  Reply With Quote
Old 06-15-2012, 10:44   #3 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x33010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

ERROR: Main data file size is less than requested to flash to main.
- Start address : 0x00000000
- Data Length: 0x00800000

Quote:
Quote:
Originally Posted by legija View Post
Ok, as i can see this phone is erased by ORT.

Download full backup from this link :
http://rapidshare.com/files/42229365...ull_backup.rar

Connect phone to RIFF, go to DCC TAB, select HTC HD2.
Open full backup, and set following options :

- Start address : 0x00000000
- Data Length: 0x00800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After this perform ROM upgrade using TG01 downloader.
  Reply With Quote
Old 06-16-2012, 11:54   #4 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
hello TG01 AFTER WRITE FULL DUMP PHONE IS DEAD

Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x37010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

Resuming write FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF on 0x000012200000
Completed in 00:17:27.063 (Average Transfer Rate: 516.37 kB/s)
  Reply With Quote
Old 06-16-2012, 12:07   #5 (permalink)
Product Manager
 
legija's Avatar
 
Join Date: Apr 2006
Age: 55
Posts: 5,746
Member: 256342
Status: Offline
Sonork: None
Thanks Meter: 28,276
RIFF JTAG Box FAQ - JTAG Manager - DCC Read/Write TAB
  Reply With Quote
Old 06-17-2012, 03:14   #6 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
Quote:
Originally Posted by legija View Post
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x37010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Detected dead body ID: 0x000000E1
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x000000E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

help sir ...........................
  Reply With Quote
Old 06-17-2012, 03:23   #7 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Toshiba TG01 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - WRONG!!!
ERROR: Current ID does not belong to the Toshiba TG01 family.


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x000000E1 - WRONG!!!
ERROR: Current ID does not belong to the HTC HD2 (Leo) family.

  Reply With Quote
Old 06-17-2012, 05:45   #8 (permalink)
No Life Poster
 
MARVZ_TG's Avatar
 
Join Date: Mar 2009
Location: YT - Channel RealFix-GRS.TV
Age: 36
Posts: 2,494
Member: 990711
Status: Offline
Sonork: 100.1597405
Thanks Meter: 1,778
Donate money to this user
procedure help sir.............

Quote:
Start address : 0x00000000
- Data Length: 0x00800000
- Check "Image file is used"
- Check "Use address as offset"
- Select ROM1
Other options must be NOT Checked, click "Write". This will restore erased area in modem part.
After this perform ROM upgrade using TG01 downloader.
Quote:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC HD2 (Leo) V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x21010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

Looking for the RIFF BOX DCCLoader USB Interface Port...FAILED
The DCCLoader USB Interface is not found. Communication continues over the DCC Interface

ERROR: Main data file size is less than requested to flash to main.
Quote:
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x23010000000000000000008000000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0xD5BC (512MB)

ERROR: Main data file size is less than requested to flash to main.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
need ericsson 88 cable migdamas Old Ericsson Phones & Sony Phones 2 03-24-2017 16:24
Need software upgrade for Nokia 5110 ptkrf Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 30 02-24-2016 10:21
needed pinout for carkit(N61xx) mobileinfo Nokia Hardware & Hardware Repair 2 07-23-2013 02:41
Eeprom dump lost, help needed. CAMILO Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 6 11-29-2010 19:04
need eeprom photo???? mobileinfo Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 0 05-26-1999 11:35

 



All times are GMT +1. The time now is 06:06.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.25757 seconds with 9 queries

SEO by vBSEO