I8160 have problem - GSM-Forum

089999945 · 07-06-2013, 07:11

when i click connect & get ID is work

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz

Detected dead body ID: 0x4BA00477

when i clock resurrection

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...FAILED
None is detected.

why like this?pls help me all user and team
thanks

089999945 · 07-06-2013, 07:55

now my problem solved by disconnect usb then resurrection

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.35, JTAG Manager Version: 1.49
Selected Resurrector: [Samsung I8160 V1.0.4705.16807]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB

Flashing the dead body...OK
Resurrection complete!

07-06-2013, 07:11	#1 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	I8160 have problem when i click connect & get ID is work Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz Detected dead body ID: 0x4BA00477 when i clock resurrection Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...FAILED None is detected. why like this?pls help me all user and team thanks

07-06-2013, 07:55	#2 (permalink)
089999945 No Life Poster Join Date: Mar 2010 Location: Cambodia Posts: 4,210 Member: 1260512 Status: Offline Sonork: 100.1605447 Thanks Meter: 461	now my problem solved by disconnect usb then resurrection Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.35, JTAG Manager Version: 1.49 Selected Resurrector: [Samsung I8160 V1.0.4705.16807] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0000 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0000 (SEM04G, 0x000000100000 Bytes = 1.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.69GB Flashing the dead body...OK Resurrection complete!