I8552 with dark screen after Jtag - GSM-Forum

wandercell · 11-18-2015, 20:04

after success in jtag resurrection unit turns on however dark blue image, accepts regular update by Odin, but always with dark blue screen, any solution?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I8552 V1.0.4969.38432]

Connecting to the dead body...OK
Detected dead body ID: 0x008E00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00FE/0x014E (P1J95L, 0x0001D2000000 Bytes = 7.28 GB)
Detected an Initialized FLASH2 Chip, ID: 0x00FE/0x014E (P1J95L, 0x000000200000 Bytes = 2.00 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 7,28GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 3,64GB

Flashing the dead body...OK
Resurrection complete!

aleksa94 · 11-18-2015, 20:15

Try different resurrector

wandercell · 11-18-2015, 20:45

which otherwise do?
I could spend another procedure

11-18-2015, 20:04	#1 (permalink)
wandercell Insane Poster Join Date: Apr 2010 Location: Brazil Posts: 92 Member: 1282334 Status: Offline Thanks Meter: 8	I8552 with dark screen after Jtag after success in jtag resurrection unit turns on however dark blue image, accepts regular update by Odin, but always with dark blue screen, any solution? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I8552 V1.0.4969.38432] Connecting to the dead body...OK Detected dead body ID: 0x008E00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00FE/0x014E (P1J95L, 0x0001D2000000 Bytes = 7.28 GB) Detected an Initialized FLASH2 Chip, ID: 0x00FE/0x014E (P1J95L, 0x000000200000 Bytes = 2.00 MB) No Resurrection Data is available for the eMMC Chip with Capacity = 7,28GB WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 3,64GB Flashing the dead body...OK Resurrection complete! Last edited by wandercell; 11-18-2015 at 20:12.

11-18-2015, 20:15	#2 (permalink)
aleksa94 Insane Poster Join Date: Mar 2013 Location: Serbia Posts: 86 Member: 1897323 Status: Offline Thanks Meter: 21	Try different resurrector

11-18-2015, 20:45	#3 (permalink)
wandercell Insane Poster Join Date: Apr 2010 Location: Brazil Posts: 92 Member: 1282334 Status: Offline Thanks Meter: 8	which otherwise do? I could spend another procedure