i9001 after repair still dead

[ponix]

hi to all

i have i 9001 dead by error flash

i try repair boot but still dead

this the log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9001 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M8G2FA, 0x0001CD000000 Bytes = 7.20 GB)

Flashing the dead body...OK
Resurrection complete!

ay solution please ?

[ponix]

i try with usb jic but not entre in download mode

this the log of analyze jtag chain

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9001 V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x27B360E1, IR Length = 0x05 bits
Total IR length: 0x0005 bits

Analizing IDCODE(s) of the JTAG scan chain:
1. 0x27B360E1: Qualcomm MSM8255, H/W Rev. #2
2. 0x27B360E1: Qualcomm MSM8255T, H/W Rev. #2
3. 0x27B360E1: Qualcomm SCORPION, H/W Rev. #2

any solution please ?

[ponix]

please any solution riff team ?

[BABAK NURI]

Hi

If you sure about Dead Phone by Wrong SW,You can Write dump file
From Here: Riffbox Server :: Login

Or Plz Contact me via sonork,,, I can check phone for search problem via Remote_Helper

[ponix]

My sonork is 100.1590620

contact me please