i9001 help - GSM-Forum

TICTAC_M · 02-01-2012, 00:00

hi.

i have one i9001 dead, i resurrection with riff, all log is ok. but now it do not enter in download mode of turn on, only enter in "ramdump mode" "cause: force upload"

please if any have any thing that can help me.

TICTAC_M · 02-02-2012, 16:20

please support, is posible that it is bug of new firmware. i resurrection but do not enter in download mode, in resurrection operation all working good 0 errors but only can enter in ramdump mode.

please help

**legija** · 02-02-2012, 17:41

As i know - volume + ramdump, volume - download mode.
Or vice versa.

Even if phone is stuck in debug mode due to security or EFS error, it will enter download mode (or should so).
Try simple trick - hold volume - and insert usb cable. Phone should be detected even if nothing is on LCD.

That is, in case eMMC is not malfunctioning, which is case many times.

tayyab007 · 03-17-2012, 15:29

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.40
Selected Resurrector: [Samsung I9001 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M8G2FA, 0x0001CD000000 Bytes = 7.20 GB)

Flashing the dead body...OK
Resurrection complete!

phone still dead.

02-01-2012, 00:00	#1 (permalink)
TICTAC_M No Life Poster Join Date: Aug 2006 Location: Ecuador -Andes Posts: 1,740 Member: 331361 Status: Offline Thanks Meter: 155	i9001 help hi. i have one i9001 dead, i resurrection with riff, all log is ok. but now it do not enter in download mode of turn on, only enter in "ramdump mode" "cause: force upload" please if any have any thing that can help me.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
Winlock 1.10 - Help	rdmfs	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-25-1999 08:21

02-02-2012, 16:20	#2 (permalink)
TICTAC_M No Life Poster Join Date: Aug 2006 Location: Ecuador -Andes Posts: 1,740 Member: 331361 Status: Offline Thanks Meter: 155	please support, is posible that it is bug of new firmware. i resurrection but do not enter in download mode, in resurrection operation all working good 0 errors but only can enter in ramdump mode. please help

02-02-2012, 17:41	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	As i know - volume + ramdump, volume - download mode. Or vice versa. Even if phone is stuck in debug mode due to security or EFS error, it will enter download mode (or should so). Try simple trick - hold volume - and insert usb cable. Phone should be detected even if nothing is on LCD. That is, in case eMMC is not malfunctioning, which is case many times.

03-17-2012, 15:29	#4 (permalink)
tayyab007 No Life Poster Join Date: Mar 2007 Location: Saudi Arabia Posts: 549 Member: 476075 Status: Offline Sonork: na Thanks Meter: 40	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.30, JTAG Manager Version: 1.40 Selected Resurrector: [Samsung I9001 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (M8G2FA, 0x0001CD000000 Bytes = 7.20 GB) Flashing the dead body...OK Resurrection complete! phone still dead.