I9003 boot repair problem - GSM-Forum

.:FaysaL:. · 11-06-2013, 07:57

creat magic card but phone ask omap 3630 driver,

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9003 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x0B6D602F - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...FAILED
ERROR: Read/Write memory failed during H/W Init.

~AKSingh~ · 11-06-2013, 08:01

just check its hardware or not
leave the set with battery connected to charger for 15 mts
see if pcb from upper end is getting heated

most of i9300 pcb are with hardware problems

br,

muhammad.arif09 · 11-06-2013, 08:11

there is 3types of I9003 boot repair dll file try other ,also remove Battery and reconnect after click resurrection

**legija** · 11-06-2013, 11:26

RIFF JTAG Box FAQ - ERROR: Read/Write memory failed during H/W Init

ajmal143trait · 01-29-2014, 11:20

hi guys, i have a lumia 520, i did boot repair with Riff box successfully, but the phone is still in qualcomhsusb mode i cant turn to flash mode,, plsss helppp

11-06-2013, 07:57	#1 (permalink)
.:FaysaL:. Insane Poster Join Date: Jun 2011 Location: BangladesH Posts: 72 Member: 1595888 Status: Offline Sonork: 100.1596965 Thanks Meter: 3	I9003 boot repair problem creat magic card but phone ask omap 3630 driver, Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9003 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x0B6D602F - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...FAILED ERROR: Read/Write memory failed during H/W Init.

11-06-2013, 08:01	#2 (permalink)
~AKSingh~ Product Supporter Join Date: May 2004 Location: INDIA Age: 55 Posts: 2,950 Member: 65063 Status: Offline Thanks Meter: 2,419	just check its hardware or not leave the set with battery connected to charger for 15 mts see if pcb from upper end is getting heated most of i9300 pcb are with hardware problems br,

11-06-2013, 08:11	#3 (permalink)
muhammad.arif09 Freak Poster Join Date: Jun 2013 Location: Dubai UAE Posts: 374 Member: 1951379 Status: Offline Sonork: 100.1647567 Thanks Meter: 148	there is 3types of I9003 boot repair dll file try other ,also remove Battery and reconnect after click resurrection

11-06-2013, 11:26	#4 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - ERROR: Read/Write memory failed during H/W Init

01-29-2014, 11:20	#5 (permalink)
ajmal143trait Freak Poster Join Date: Apr 2010 Posts: 206 Member: 1286359 Status: Offline Thanks Meter: 26	hi guys, i have a lumia 520, i did boot repair with Riff box successfully, but the phone is still in qualcomhsusb mode i cant turn to flash mode,, plsss helppp