I9003 dead body... - GSM-Forum

amazir · 03-22-2013, 20:25

hi bro
i had an I9003 with bugs slow working .i flashed it with odin 1.82 .at the end with success but now it won t turn on ????
i tried to repair it with riffbox but always dead body...can some one help me please

.::EXTREME::. · 03-23-2013, 07:51

yes ..
same happen to me today...

need solution.

devilishere · 03-23-2013, 09:34

try this
i think your problm will solve

Just insert mmc card to mmc reader Then click to resurrection & Go to Magic card option After that select card and Make Magic card

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.27, JTAG Manager Version: 1.36
Selected Resurrector: [Samsung I9003 (via IRAM)]

Connecting to the dead body...OK
Detected dead body ID: 0x0B6D602F - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

TheFoXMK · 04-01-2013, 08:08

problem solved this process ..
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9003 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x0B6D602F - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!

bluffmaster · 04-01-2013, 09:44

Is this Magic Card option is available for M110S (Korean Galaxy S)

03-22-2013, 20:25	#1 (permalink)
amazir No Life Poster Join Date: Oct 2006 Posts: 745 Member: 362622 Status: Offline Thanks Meter: 43	I9003 dead body... hi bro i had an I9003 with bugs slow working .i flashed it with odin 1.82 .at the end with success but now it won t turn on ???? i tried to repair it with riffbox but always dead body...can some one help me please

03-23-2013, 09:34	#3 (permalink)
devilishere Cheater -Don't Deal with him- Join Date: Jul 2010 Posts: 61 Member: 1340026 Status: Offline Sonork: 123456 Thanks Meter: 13	try this i think your problm will solve Just insert mmc card to mmc reader Then click to resurrection & Go to Magic card option After that select card and Make Magic card Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.27, JTAG Manager Version: 1.36 Selected Resurrector: [Samsung I9003 (via IRAM)] Connecting to the dead body...OK Detected dead body ID: 0x0B6D602F - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete! Last edited by devilishere; 03-23-2013 at 09:44.

03-23-2013, 07:51	#2 (permalink)
.::EXTREME::. No Life Poster Join Date: Jul 2011 Location: ۞_ KERALA__۞_INDIA Posts: 3,352 Member: 1619462 Status: Offline Sonork: 100.1606509 Thanks Meter: 1,517	yes .. same happen to me today... need solution.

04-01-2013, 08:08	#4 (permalink)
TheFoXMK No Life Poster Join Date: Feb 2008 Posts: 602 Member: 708514 Status: Offline Thanks Meter: 36	problem solved this process .. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9003 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x0B6D602F - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

04-01-2013, 09:44	#5 (permalink)
bluffmaster No Life Poster Join Date: Mar 2006 Location: Inside MTK Age: 38 Posts: 1,241 Member: 248182 Status: Offline Thanks Meter: 786	Is this Magic Card option is available for M110S (Korean Galaxy S)