i9020t boot repair - GSM-Forum

chakoll1993 · 09-05-2013, 19:06

I have Samsung GT-I9020T phone.
it is dead boot.(after update bad ICS zip file)
i want to repair it with Riff box.
Is Riff box support to Samsung GT-I9020T for dead boot repair?
please reply ASAP.
thanks.

~AKSingh~ · 09-05-2013, 22:30

Quote:

Originally Posted by chakoll1993

I have Samsung GT-I9020T phone.
it is dead boot.(after update bad ICS zip file)
i want to repair it with Riff box.
Is Riff box support to Samsung GT-I9020T for dead boot repair?
please reply ASAP.
thanks.

offcource its supported !
just choose model , solder jtag wires as shown in figure (interface pinout)
connect usb cable and do resurrection
push power button for intense writing
now put phone in download mode for flashing by usb alone

br,

kushol · 11-01-2013, 15:38

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [Samsung I9020T V1.0.4787.59284]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Detected an Initialized FLASH2 Chip, ID: 0x0002/0x0100 (SEM16G, 0x0003B5400000 Bytes = 14.83 GB)
Detected an Initialized FLASH3 Chip, ID: 0x0002/0x0100 (SEM16G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

rasgula · 11-28-2013, 05:43

i did the same.... its flash and pass but phone is still dead.
regards

09-05-2013, 19:06	#1 (permalink)
chakoll1993 Junior Member Join Date: Sep 2013 Posts: 7 Member: 2015716 Status: Offline Thanks Meter: 0	i9020t boot repair I have Samsung GT-I9020T phone. it is dead boot.(after update bad ICS zip file) i want to repair it with Riff box. Is Riff box support to Samsung GT-I9020T for dead boot repair? please reply ASAP. thanks.

11-01-2013, 15:38	#3 (permalink)
kushol No Life Poster Join Date: Jun 2006 Location: ..::SL3 Unlock Source::.. Age: 38 Posts: 1,253 Member: 293662 Status: Offline Sonork: 100.1622609 Thanks Meter: 317	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.51 Selected Resurrector: [Samsung I9020T V1.0.4787.59284] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Detected an Initialized FLASH2 Chip, ID: 0x0002/0x0100 (SEM16G, 0x0003B5400000 Bytes = 14.83 GB) Detected an Initialized FLASH3 Chip, ID: 0x0002/0x0100 (SEM16G, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete!

11-28-2013, 05:43	#4 (permalink)
rasgula No Life Poster Join Date: Feb 2005 Location: Canada Posts: 1,278 Member: 119464 Status: Online Thanks Meter: 288	i did the same.... its flash and pass but phone is still dead. regards