GSM-Forum
Page 2 of 19 1 2 34512 Last »
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   RIFFBOX (https://forum.gsmhosting.com/vbb/f634/)
-   -   i9023 NEXUS S Boot Repair Problem (https://forum.gsmhosting.com/vbb/f634/i9023-nexus-s-boot-repair-problem-1298135/)

ken6430841 06-27-2011 11:08
use sptbox change imei

Vitalich 06-27-2011 14:39
Thanks...
But I don't have SPTBox yet. :(

Right now I have "progress" with I9023.
After reflashing with Odin (with EFS clear checkbox) Baseband version was corrected and IMEI was set as 004999/01/064000/0 as expected.
It is a little better than without IMEI at all.

Thanks again.
Now I know what I have to do. :)

Little_Master 06-29-2011 08:21
i9023 NEXUS S Boot Repair Problem
 
I tried with and without Gremlin Option ,, and With and Without Recovery Selection ..


But Phones still on blackscreen. Only two lights comes on bottom keypad.


http://i587.photobucket.com/albums/s...sona/i9023.jpg



Code:
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.25, JTAG Manager Version: 1.33
Selected Resurrector: [Samsung I9023]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 800 kHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)

Flashing the dead body...OK
Resurrection complete!
Anything Else I can Try ???

LITTLE MASTER

hamidraja 07-04-2011 17:43
iv got the same problem any idea's

livemobi 07-11-2011 18:02
Why no one cares this problem?

Little_Master 07-12-2011 00:54
Quote:
Originally Posted by livemobi (Post 7519770)
Why no one cares this problem?

Even Im still wating for reply.. I still got phone


LITTLE MASTER

legija 07-12-2011 11:44
i9020 and i9023 were already tested, can You please write more about phone history ?

sen-i 07-12-2011 19:18
i need fullflash for i9020 , my one is i9020T
but imei problem , i9023 have enother lcd as i9020 , if i flash my i9020 as i9023 i have no picters , only to green line on lcd , but i can going to downloadmodus , and flash it with odin

Little_Master 07-12-2011 23:05
Quote:
Originally Posted by Little_Master (Post 7520513)
Even Im still wating for reply.. I still got phone


LITTLE MASTER

This is my own phone..

Phone was working fine. I was trying to root it. After root , It stucked on LOCK OPENED screen.

I flashed with SPT BOX.. But SPT BOX didn't have CSC file, And i Flashed it without that file.

At the end , it stuck on Black Screen , and only two lights at the bottom.

Boot Repair Success by RIFF, But still have same condition

LITTLE MASTER

legija 07-12-2011 23:12
Black screen means nothing, explain please can You enter download mode or not, meaning is phone detected on USB port by PC ?

Little_Master 07-13-2011 01:01
Quote:
Originally Posted by legija (Post 7523983)
Black screen means nothing, explain please can You enter download mode or not, meaning is phone detected on USB port by PC ?
Phone not goes into Downalod Mode.

When i connect it to PC , PC make sound of connecting , But nothing appears in Device Manager

LITTLE MASTER

connexion2005 07-15-2011 12:19
Do you have a JIG to enter download mode?

MobileTechVideos » Products

I use my JIG on all SGS devices to enter download mode. Key combinations do not always work. That link is my personal site.

hackgsm 07-15-2011 14:57
http://forum.gsmhosting.com/vbb/f634...5/#post7516005

Little_Master 07-15-2011 16:37
I have used jig .. but no work

..

Just recently , I have successfully Flashed phone with Z3x Box.

But

Now, phone is stuck on GOOGLE Screen with Opened Locked LOGO..

DOn't know how to revive it from this stage.

Thanks to RIFF , to make phone able to flash

LITTLE MASTER

Little_Master 07-16-2011 04:39
Phone alive :-)
 
http://i587.photobucket.com/albums/s...na/i9023-1.jpg


Phone Alive :-)

Thanks goes to

RIFF BOX - To make phone able to recognise with PC
Z3x - To flash the phone , to able to go upto GOOGLE LOGO
TSAR3000 - To Fully Flash the phone with 2.3.4


Code:
Firmware Update Steps:
 
  1. Run Samsung I9020 Google Nexus S Downloader.

  2. Put the phone into Download Mode: Press Middle of Volume Key and Connect USB cable.

  3. You can see ( Downloading...) on the phone LCD.

  4. The program must read the Com number it takes.

  5. Click BOOT button and select:Bootloader_I9020xxxxx.tar.md5

  6. Click Phone button and select: MODEM_I9020xxxxx_REV_00_CL912571_SIGNED.tar.md5

  7. Click PDA button and select: PDA_SOJU_xxxx.....tar.md5

  8. Click CSC button and select: DGS_I9020_EUR.tar

  9. Click Start button and the update process will start.

  10. Do not touch or remove anything till the device rebooted and you can see PASS word on the program.

FULL FLASH FILE 2.3.4


LITTLE MASTER


All times are GMT +1. The time now is 16:41.
Page 2 of 19 1 2 34512 Last »
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.15607 seconds with 6 queries

SEO by vBSEO