I9100 Error code: 0x00000048 - GSM-Forum

gsmnilambur · 09-17-2012, 21:31

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

*******R DID WRONG FLASH AFTER MOBILE IS DEAD THAT WHAT HE SAID THEN I TRY TO DO DEAD BOOT ALL THE TIME I GOT SAME ERROR

AND WHEN I CONNECT USB DETECT PCA AND ITS ASK FOR DRIVER SEC S5PC110 Test B/D NOT ENTER DOWNLOAD MODE

THEN I TRY TO SEARCH RIFF JTAG Box FAQ - powered by phpMyFAQ 2.7.5 HEAR I FOUND HARDWARE PROBLEM AFTER I RE HOT SD CHIP SAME STILL SAME ERROR

SIR PLS GIVE ME ONE GOOD ANSWER ITS HARDWARE OR SOFTWARE AND HOW TO SOLVE

THANK YOU

islamic.tj · 09-18-2012, 07:44

Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz

change TCK Frequency is 8 MHz

gsmnilambur · 09-18-2012, 08:10

Quote:

Originally Posted by islamic.tj

Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz

change TCK Frequency is 8 MHz

bro i try all TCK frequency same error coming!!!!!!

hear is Resurrection DOWNLOAD MOD

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Initializing internal hardware configuration...OK
Uploading selected SPL code into RAM...OK

Executing the uploaded SPL code...FAILED
ERROR: DCC Loader Execute failed. Terminating.

THANK YOU

BABAK NURI · 09-18-2012, 09:35

Hi
You need replace eMMC Chip..
--------------
Why do you think phone can repair by heating?

guy_askali · 10-07-2012, 19:40

pls see me emmc chip

BABAK NURI · 10-07-2012, 22:19

Quote:

Originally Posted by guy_askali

pls see me emmc chip

Hi
Sorry,i don't have any photo for now

But You can find eMMC chip in Your PCB ... Just Look Behind the Mainbord ,It's """ Samsung KMVL000M"

udhai_12 · 11-09-2012, 15:22

Hi,

when i try to initiate download mode i9100 i got this error , what may be the prob?

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Initializing internal hardware configuration...OK
Uploading selected SPL code into RAM...OK

Executing the uploaded SPL code...FAILED
ERROR: DCC Loader Execute failed. Terminating.

And when i try to resurrect the i9100,

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.45
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

Br
kumar.

BABAK NURI · 11-09-2012, 22:03

Hi

This is bad eMMC :

Quote:

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

You Need replace new one
RIFF JTAG Box FAQ - WARNING: DCC Loader was unable to initialize FLASH1 chip.

riajul1988 · 11-22-2012, 10:11

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.47
Selected Resurrector: [Samsung i9100 V1.0.4582.4854]
I9100

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

BABAK NURI · 11-22-2012, 13:13

Hi
This is clear case of damaged eMMC Chip
So,Make Sure About Soldered Wires
Then,You Need Replace eMMC Chip

aftabmiraj15 · 11-23-2012, 12:17

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

aftabmiraj15 · 11-23-2012, 12:38

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

supermatrix · 12-26-2012, 12:30

hi i have problem to ressuction my samsung i91000

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9100 V1.0.4724.60074]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

Any ideal all supporter

thanks..

**legija** · 12-26-2012, 12:40

There is no flash chip (eMMC) detected. Obviously You have to check it, either reball it or replace with new one.

vital_888 · 01-03-2013, 09:36

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I9100 V1.0.4724.60074]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14,68GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

09-17-2012, 21:31	#1 (permalink)
gsmnilambur Freak Poster Join Date: May 2011 Location: up iphone Age: 77 Posts: 218 Member: 1577928 Status: Offline Sonork: 100.1611402 Thanks Meter: 37	Samsung i9100 resurrection faild Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.33, JTAG Manager Version: 1.44 Selected Resurrector: [Samsung i9100 V1.0.4582.4854] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader. *****R DID WRONG FLASH AFTER MOBILE IS DEAD THAT WHAT HE SAID THEN I TRY TO DO DEAD BOOT ALL THE TIME I GOT SAME ERROR AND WHEN I CONNECT USB DETECT PCA AND ITS ASK FOR DRIVER SEC S5PC110 Test B/D** NOT ENTER DOWNLOAD MODE THEN I TRY TO SEARCH RIFF JTAG Box FAQ - powered by phpMyFAQ 2.7.5 HEAR I FOUND HARDWARE PROBLEM AFTER I RE HOT SD CHIP SAME STILL SAME ERROR SIR PLS GIVE ME ONE GOOD ANSWER ITS HARDWARE OR SOFTWARE AND HOW TO SOLVE THANK YOU

11-09-2012, 15:22	#7 (permalink)
udhai_12 Freak Poster Join Date: Nov 2002 Location: india Age: 49 Posts: 328 Member: 17621 Status: Offline Thanks Meter: 23	I9100 dead, Hi, when i try to initiate download mode i9100 i got this error , what may be the prob? Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Initializing internal hardware configuration...OK Uploading selected SPL code into RAM...OK Executing the uploaded SPL code...FAILED ERROR: DCC Loader Execute failed. Terminating. And when i try to resurrect the i9100, Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.45 Selected Resurrector: [Samsung i9100 V1.0.4582.4854] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Br kumar.

11-22-2012, 10:11	#9 (permalink)
riajul1988 No Life Poster Join Date: Feb 2011 Location: (BaNgLaDeSh).(U.A.E,AD) Posts: 1,952 Member: 1511441 Status: Offline Sonork: 100.1604057 Thanks Meter: 1,162	ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.47 Selected Resurrector: [Samsung i9100 V1.0.4582.4854] I9100 Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

12-26-2012, 12:30	#13 (permalink)
supermatrix Freak Poster Join Date: Apr 2006 Posts: 309 Member: 263548 Status: Offline Thanks Meter: 24	Help Ressurrection samsung i9100 error hi i have problem to ressuction my samsung i91000 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9100 V1.0.4724.60074] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader. Any ideal all supporter thanks..

01-03-2013, 09:36	#15 (permalink)
vital_888 Freak Poster Join Date: Mar 2007 Location: Kazahstan Posts: 141 Member: 474934 Status: Offline Sonork: 100.1619723 Thanks Meter: 12	i9100 0x00000048 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung I9100 V1.0.4724.60074] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.80V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14,68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

09-18-2012, 07:44	#2 (permalink)
islamic.tj No Life Poster Join Date: Mar 2011 Location: Tadjikistan, Dushanbe Age: 35 Posts: 552 Member: 1533366 Status: Offline Thanks Meter: 131	Set I/O Voltage reads as 2.81V, TCK Frequency is 10 MHz change TCK Frequency is 8 MHz

09-18-2012, 09:35	#4 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi You need replace eMMC Chip.. -------------- Why do you think phone can repair by heating?

10-07-2012, 19:40	#5 (permalink)
guy_askali No Life Poster Join Date: Nov 2006 Location: maldives Posts: 509 Member: 389862 Status: Offline Sonork: guy_askali Thanks Meter: 54	pls see me emmc chip

11-22-2012, 13:13	#10 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi This is clear case of damaged eMMC Chip So,Make Sure About Soldered Wires Then,You Need Replace eMMC Chip

11-23-2012, 12:17	#11 (permalink)
aftabmiraj15 Freak Poster Join Date: Apr 2011 Location: Spain Barcelona Posts: 109 Member: 1558861 Status: Offline Sonork: aftabmiraj15 Thanks Meter: 4	WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

11-23-2012, 12:38	#12 (permalink)
aftabmiraj15 Freak Poster Join Date: Apr 2011 Location: Spain Barcelona Posts: 109 Member: 1558861 Status: Offline Sonork: aftabmiraj15 Thanks Meter: 4	WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

12-26-2012, 12:40	#14 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	There is no flash chip (eMMC) detected. Obviously You have to check it, either reball it or replace with new one.