I9100 resurrection stuck at 10% - GSM-Forum

milkyctg · 09-13-2012, 09:06

Hi
I'm facing big problem when I go to make resurrection my sam Sg2 I9100. It stuck on 10% or 5% or 2%
Here is the picture

BABAK NURI · 09-13-2012, 10:38

Hi
if jtag manager freeze when writing,You need check Connection,(soldered wires,usb,battrey)

Quote:

Badly connected/soldered

- Bad ribbon cable

- RTCK/TCK sampling rate too high

- In rare cases, target device is malfunctioning, or it's powered off.

milkyctg · 09-15-2012, 18:46

Strange behavior! after 10% resurrection phone can be powered on. But it can't go in download mode. Any suggestion pls?

drjaved_akhter · 09-15-2012, 19:18

Quote:

Originally Posted by milkyctg

Strange behavior! after 10% resurrection phone can be powered on. But it can't go in download mode. Any suggestion pls?

use jig usb 302k ..............

BABAK NURI · 09-15-2012, 23:21

Quote:

Originally Posted by milkyctg

Strange behavior! after 10% resurrection phone can be powered on. But it can't go in download mode. Any suggestion pls?

Hi
Yes,USB Jig is good idea
But,Beter try for complete resurrect....
Because maybe you have few problem when flashing or repairing...
---
Just check connection again and use USB cable and power supply

milkyctg · 09-16-2012, 01:37

Quote:

Originally Posted by drjaved_akhter

use jig usb 302k ..............

Would you pls give me details descriptions for the jig usb 302k? actually I have no idea about it.
Thanks

09-15-2012, 18:46	#3 (permalink)
milkyctg No Life Poster Join Date: Mar 2004 Location: cYBER sPACE Posts: 664 Member: 56855 Status: Offline Thanks Meter: 77	Strange behavior! after 10% resurrection phone can be powered on. But it can't go in download mode. Any suggestion pls?