I9295 fully dead after RESURRECTION !! - GSM-Forum

chamin · 12-10-2014, 07:10

hi mate ..
i had i9295 logo restart phone ..after RESURRECTION phone dead

log file>>>>

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung I9295 V1.0.5046.52407]

Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

now phone dead ...
how can i power on it

please help me anybody

thanks

BABAK NURI · 12-11-2014, 04:37

Hi
Please contact me via ICQ with connected phone to riff box

Thanks

001blade · 06-17-2015, 11:55

Hi,
you have fix the phone?
have the Same Problem on an i9295 Resurection ok are phone is dead

chamin · 06-19-2015, 09:48

Quote:

Originally Posted by 001blade

Hi,
you have fix the phone?
have the Same Problem on an i9295 Resurection ok are phone is dead

no i didn't repair it

12-10-2014, 07:10	#1 (permalink)
chamin No Life Poster Join Date: Sep 2006 Location: in the office Age: 38 Posts: 609 Member: 352329 Status: Offline Thanks Meter: 38	I9295 fully dead after RESURRECTION !! hi mate .. i had i9295 logo restart phone ..after RESURRECTION phone dead log file>>>> Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Samsung I9295 V1.0.5046.52407] Connecting to the dead body...OK Detected dead body ID: 0x2071B0E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is 4 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB Flashing the dead body...OK Resurrection complete! now phone dead ... how can i power on it please help me anybody thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-11-2014, 04:37	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Please contact me via ICQ with connected phone to riff box Thanks

06-17-2015, 11:55	#3 (permalink)
001blade Insane Poster Join Date: May 2003 Location: Troisdorf, Germany Age: 41 Posts: 61 Member: 29086 Status: Offline Thanks Meter: 5	Hi, you have fix the phone? have the Same Problem on an i9295 Resurection ok are phone is dead