I9505 After resurrection phone still dead? - GSM-Forum

MUTUAL · 09-19-2013, 05:14

Hi team after complete flash with jtag stiil dead what should i do?
here is log

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [Samsung I9505 V1.0.4970.39022]

Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

i will try with all option still same
thanks

MUTUAL · 09-19-2013, 22:29

anyone knows what to do? how do i fix this?

titanic · 09-25-2013, 11:19

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [Samsung I9505 V1.0.4970.39022]

Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...OK
Resurrection complete!

me too have same problem but the devices detected by the computer says QHSUSB_DLOAD.

Need help .....ASAP.

MUTUAL · 09-25-2013, 22:26

on my case device not detecting

GsmUniversal · 09-25-2013, 23:34

Hi

make erase 1st then try to ressurection again

post results

KAIJIN6969 · 09-27-2013, 00:43

Same situation no boot in dowload mode after resurrection, any fix?

feyz34 · 09-27-2013, 09:55

Quote:

Originally Posted by MUTUAL

Hi team after complete flash with jtag stiil dead what should i do?
here is log

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.51
Selected Resurrector: [Samsung I9505 V1.0.4970.39022]

Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

i will try with all option still same
thanks

I have the same problem
What is the solution please help

KAIJIN6969 · 09-27-2013, 14:00

Anyone can help us? Plz

MUTUAL · 09-27-2013, 23:27

i think software have bug many people have same problem plz supporter fix this problem

Basol · 09-28-2013, 11:11

I have same problem. please fix problem.

KAIJIN6969 · 09-28-2013, 15:15

I think it will be because of the new bootloader that Samsung has put in new roms with Knox warranty .... and the resurrector we have is the old bootloader, and this does not make the boot, I think that is the problem.

feyz34 · 09-28-2013, 18:15

help please all fix problem

KAIJIN6969 · 09-28-2013, 18:44

supporters we need some feedback

toninhosantos · 09-28-2013, 20:03

With absolute certainty the Riff Box is the best jtag market. Works with devices supported and unsupported. But her support is very weak, does not provide video tutorials for users to work and learn to enjoy the numerous possibilities of this great equipment.

MUTUAL · 09-29-2013, 22:48

Quote:

Originally Posted by toninhosantos

With absolute certainty the Riff Box is the best jtag market. Works with devices supported and unsupported. But her support is very weak, does not provide video tutorials for users to work and learn to enjoy the numerous possibilities of this great equipment.

You r right best box in the market for JTAG but the problem is support they dont reply they should tell us what to do or need to wait for new software.

09-19-2013, 22:29	#2 (permalink)
MUTUAL No Life Poster Join Date: Jul 2005 Location: Auckland Posts: 4,547 Member: 160928 Status: Offline Thanks Meter: 338	anyone knows what to do? how do i fix this?

09-25-2013, 11:19	#3 (permalink)
titanic Freak Poster Join Date: Apr 2004 Location: Mumbai, kuwait, UAE Posts: 164 Member: 63065 Status: Offline Sonork: 100.102547 Thanks Meter: 24	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.51 Selected Resurrector: [Samsung I9505 V1.0.4970.39022] Connecting to the dead body...OK Detected dead body ID: 0x2071B0E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (AFEABB, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (AFEABB, 0x000000400000 Bytes = 4.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB Flashing the dead body...OK ERROR: DCC Loader has reported Error Code = 0x28 (0x000000). Trying to recover...OK Resurrection complete! me too have same problem but the devices detected by the computer says QHSUSB_DLOAD. Need help .....ASAP.

09-25-2013, 22:26	#4 (permalink)
MUTUAL No Life Poster Join Date: Jul 2005 Location: Auckland Posts: 4,547 Member: 160928 Status: Offline Thanks Meter: 338	on my case device not detecting

09-25-2013, 23:34	#5 (permalink)
GsmUniversal No Life Poster Join Date: Dec 2007 Location: Skype , Sonork Posts: 4,857 Member: 649528 Status: Offline Sonork: 100.1590443 Thanks Meter: 6,958	Hi make erase 1st then try to ressurection again post results

09-27-2013, 00:43	#6 (permalink)
KAIJIN6969 Junior Member Join Date: Oct 2010 Posts: 6 Member: 1417564 Status: Offline Thanks Meter: 0	Same situation no boot in dowload mode after resurrection, any fix?

09-27-2013, 14:00	#8 (permalink)
KAIJIN6969 Junior Member Join Date: Oct 2010 Posts: 6 Member: 1417564 Status: Offline Thanks Meter: 0	Anyone can help us? Plz

09-27-2013, 23:27	#9 (permalink)
MUTUAL No Life Poster Join Date: Jul 2005 Location: Auckland Posts: 4,547 Member: 160928 Status: Offline Thanks Meter: 338	i think software have bug many people have same problem plz supporter fix this problem

09-28-2013, 11:11	#10 (permalink)
Basol Insane Poster Join Date: Jan 2008 Location: Turkey Posts: 59 Member: 672967 Status: Offline Thanks Meter: 3	I have same problem. please fix problem.

09-28-2013, 15:15	#11 (permalink)
KAIJIN6969 Junior Member Join Date: Oct 2010 Posts: 6 Member: 1417564 Status: Offline Thanks Meter: 0	I think it will be because of the new bootloader that Samsung has put in new roms with Knox warranty .... and the resurrector we have is the old bootloader, and this does not make the boot, I think that is the problem.

09-28-2013, 18:15	#12 (permalink)
feyz34 Freak Poster Join Date: Dec 2010 Posts: 129 Member: 1459548 Status: Offline Thanks Meter: 16	help please all fix problem

09-28-2013, 18:44	#13 (permalink)
KAIJIN6969 Junior Member Join Date: Oct 2010 Posts: 6 Member: 1417564 Status: Offline Thanks Meter: 0	supporters we need some feedback

09-28-2013, 20:03	#14 (permalink)
toninhosantos No Life Poster Join Date: Jun 2010 Location: Xique-Xique-Bahia, Brasil Age: 46 Posts: 904 Member: 1320000 Status: Offline Sonork: 100.1667898 Thanks Meter: 272	With absolute certainty the Riff Box is the best jtag market. Works with devices supported and unsupported. But her support is very weak, does not provide video tutorials for users to work and learn to enjoy the numerous possibilities of this great equipment.