JTAG Pinouts, Full flash dumps, CDMA/GSM/UMTS requests/exchange

[iki]

is there pinout for HTC Rose , i have pics of pcb and have one dead and one alive ,
here are pics of pcb , both sides

RapidShare: 1-CLICK Web hosting - Easy Filehosting

[levsha]

Originally Posted by aabbcc

Need pinout for Samsung F500.

Here is full pinout for Samsung F500:



This is another JTAG pinout for Samsung F500 MSM JTAG:



PS: remember, RIFFbox support only MSM part repair for now.

BR
levsha

[aabbcc]

Originally Posted by levsha

Here is full pinout for Samsung F500:

This pinout is correct. Thanks!

Open serial port...OK
Connecting to the RIFF Box...OK

Connecting to the dead body...OK
Detected dead body ID: 0x300600E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x0020/0x0079
Flashing the dead body...OK
Resurrection complete!

[barac_m]

this is a working pinout for sam i600 modem part
I have a working unit....

Open serial port...OK
Connecting to the RIFF Box...OK

Connecting to the PXA270 target...OK
Set I/O Voltage reads as 3.19V, TCK Frequency is 10 MHz

Target ID on TAP0: 0xFE7FFE7F - Connected OK

[mehdi_naghous]

how to find mobile jtag pinout
in mainboard

[levsha]

Originally Posted by mehdi_naghous

how to find mobile jtag pinout
in mainboard

Find JTAG pinout is very hard. The simplest way is desolder processor and find pinout with help of digital multimeter.

BR
levsha

[alim2201]

Originally Posted by levsha

Find JTAG pinout is very hard. The simplest way is desolder processor and find pinout with help of digital multimeter.

BR
levsha

thanks mr levsha
can you give me more detailes for find jtag pinout by multimeter

[levsha]

If you can measure resistance and know where are processor's JTAG inputs and outputs you are able to find pinout on PCB.

BR
levsha

[alim2201]

Originally Posted by levsha

If you can measure resistance and know where are processor's JTAG inputs and outputs you are able to find pinout on PCB.

BR
levsha

yes
i know how to find with multimeter
where are processor's JTAG inputs in qualcomm infineon and other procssor
do you have schematic of this processor for find pinout or have other way to find pinout

[levsha]

For which processor(s) do you need information?

BR
levsha

[alim2201]

Originally Posted by levsha

For which processor(s) do you need information?

BR
levsha

Qualcomm msm7200 and other

[levsha]

Here is Qualcomm MSM7200 processor full pinout.

BR
levsha

[alim2201]

Originally Posted by levsha

Here is Qualcomm MSM7200 processor full pinout.

BR
levsha

thanks levsha for this pinout
where you find this schamatic
and where can i found other schamatic
can you help me
thanks

[barac_m]

Working pinout sam g800
usb cable only need

Open serial port...OK
Connecting to the RIFF Box...OK

Connecting to the ARM926 target...OK
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK

Target ID on TAP0: 0x200C00E1 - Connected OK

Open serial port...OK
Connecting to the RIFF Box...OK

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
  Device on TAP #0: ID = 0x200C00E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

[kamiran]

is there ne progress on xperia x10 jtag.i need them badly i have one in hand but dont want to desolder the processor as its brand new expensive brick

Br

K@mi