Lg P700 repair - GSM-Forum

stefani · 08-14-2013, 08:36

Hello..i have this P700..stuck on logo..not recognized by PC....

Select P705 :
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.36, JTAG Manager Version: 1.50
Selected Resurrector: [LG P705 V1.0.4672.58562]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - WRONG!!!
ERROR: Current ID does not belong to the LG P705 family.

Any help ??

**legija** · 08-14-2013, 10:48

Hi,
Just disable IDCODE check - Box Service - Advanced Settings.

stefani · 08-14-2013, 11:23

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.36, JTAG Manager Version: 1.50
Selected Resurrector: [LG P705 V1.0.4672.58562]

Connecting to the dead body...OK
Detected dead body ID: 0x3BA00477 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x004A (HYNIX, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 3.61GB

Flashing the dead body...OK
Resurrection complete!

But still stuck on logo and not recognized by PC..can by hardware ??

**legija** · 08-14-2013, 11:42

Hi,
It's possible, but You also might need to flash dump.
DLL restores boot zones, and there could be problems with NVM.

stefani · 08-14-2013, 11:46

Quote:

Originally Posted by legija

Hi,
It's possible, but You also might need to flash dump.
DLL restores boot zones, and there could be problems with NVM.

Where i can find full dump ?

**legija** · 08-14-2013, 11:53

At the moment I don't have it. Maybe some user can read it for You.

BABAK NURI · 08-14-2013, 22:59

Quote:

Originally Posted by legija

At the moment I don't have it. Maybe some user can read it for You.

Hi Mr.Legija
We Have LG_P700_L7_Alive Dump in My Folder in Public ftp...
Also he can contact me via sonork,,i'll write needed data by remote

You Are Very Busy Right Now But Plz Accept From R-H Also Plz On Server

Thanks

zabrzesklep · 07-02-2014, 11:52

I have this problem after change flex with system conector computer recognized my phone.

08-14-2013, 08:36	#1 (permalink)
stefani No Life Poster Join Date: Mar 2007 Location: Roumania Posts: 1,140 Member: 461923 Status: Offline Thanks Meter: 2,020	Lg P700 repair Hello..i have this P700..stuck on logo..not recognized by PC.... Select P705 : Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.36, JTAG Manager Version: 1.50 Selected Resurrector: [LG P705 V1.0.4672.58562] Connecting to the dead body...OK Detected dead body ID: 0x3BA00477 - WRONG!!! ERROR: Current ID does not belong to the LG P705 family. Any help ??

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-14-2013, 10:48	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Just disable IDCODE check - Box Service - Advanced Settings.

08-14-2013, 11:23	#3 (permalink)
stefani No Life Poster Join Date: Mar 2007 Location: Roumania Posts: 1,140 Member: 461923 Status: Offline Thanks Meter: 2,020	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.36, JTAG Manager Version: 1.50 Selected Resurrector: [LG P705 V1.0.4672.58562] Connecting to the dead body...OK Detected dead body ID: 0x3BA00477 - IGNORED! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0090/0x004A (HYNIX, 0x0000E7000000 Bytes = 3.61 GB) Detected an Initialized FLASH2 Chip, ID: 0x0090/0x004A (HYNIX, 0x000000200000 Bytes = 2.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 3.61GB Flashing the dead body...OK Resurrection complete! But still stuck on logo and not recognized by PC..can by hardware ??

08-14-2013, 11:42	#4 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, It's possible, but You also might need to flash dump. DLL restores boot zones, and there could be problems with NVM.

08-14-2013, 11:53	#6 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	At the moment I don't have it. Maybe some user can read it for You.

07-02-2014, 11:52	#8 (permalink)
zabrzesklep Registered User Join Date: Sep 2005 Location: poland Posts: 28 Member: 181578 Status: Offline Thanks Meter: 0	I have this problem after change flex with system conector computer recognized my phone.