lumia 520 dead boot repair error plz help - GSM-Forum

ajmal786 · 06-17-2014, 05:40

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900]

Connecting to the dead body...OK
Detected dead body ID: 0x207D00E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x02010035

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,28GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

**legija** · 06-17-2014, 12:02

Make sure that NRST and GND pins are connected properly, otherwise You can have such errors.
Also - fully charged battery is required.

ajmal786 · 06-17-2014, 13:35

Thanks for answer
i should download any require file for this?
Already download (Nokia_Lumia_520.dll) this enough for repair)?

**legija** · 06-18-2014, 11:29

Quote:

Originally Posted by ajmal786

Thanks for answer
i should download any require file for this?
Already download (Nokia_Lumia_520.dll) this enough for repair)?

Yes it should be, though from log i see You have unsupported MCU ID.

First You must solve connection problem, because from log i can see that eMMC is not detected. It can be due to bad connection, but also because of dead eMMC.

06-17-2014, 05:40	#1 (permalink)
ajmal786 No Life Poster Join Date: Aug 2012 Posts: 979 Member: 1792561 Status: Offline Thanks Meter: 78	lumia 520 dead boot repair error plz help Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Resurrector: [Nokia Lumia 520 V1.0.5149.18900] Connecting to the dead body...OK Detected dead body ID: 0x207D00E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x02010035 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 7,28GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

06-17-2014, 12:02	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Make sure that NRST and GND pins are connected properly, otherwise You can have such errors. Also - fully charged battery is required.

06-17-2014, 13:35	#3 (permalink)
ajmal786 No Life Poster Join Date: Aug 2012 Posts: 979 Member: 1792561 Status: Offline Thanks Meter: 78	Thanks for answer i should download any require file for this? Already download (Nokia_Lumia_520.dll) this enough for repair)?