lumia 610 unlock not done pls check status...

[jcp.india]

25.01.2013 RIFF JTAG – Nokia Lumia 610 Unbrick – Dead Boot repair supported
Repairing bricked Nokia Lumia 610 is easy with the RIFF Box.
Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Nokia Lumia 610:
Solder JTAG cable to Nokia Lumia 610 JTAG pads;
Insert USB Data cable into board and PC;
Make sure Nokia Lumia 610 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;
Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

[Faheem Anjum]

sp unlock not support for yet , you can repair just dead boot only for now

[newchief]

Any news for unlock lumia 610?

[T Mobile]

I need full dump lumia 610 unlocked for test . Please upload here if you have .
Br