Lumia 920 boor repair problem - GSM-Forum

brokendreem · 10-28-2013, 10:30

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.54
Selected Resurrector: [Nokia Lumia 920 V1.0.5040.1457]

Connecting to the dead body...OK
Detected dead body ID: 0x706B40E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x02060035

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 29,12GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 29,12GB

Flashing the dead body...

**legija** · 10-28-2013, 10:58

It appears that eMMC is not detected.
What is phone history ?

phuonglan88 · 10-28-2013, 11:36

Lumia 920 Repair Need Help

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.54
Selected Resurrector: [Nokia Lumia 920 V1.0.5040.1457]

Connecting to the dead body...OK
Detected dead body ID: 0x706B40E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (032G94, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (032G94, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 29,12GB

Flashing the dead body...OK
Resurrection complete!

Selected Resurrection Data for the eMMC Chip with Capacity = 29,12GB

Flashing the dead body...

iftikhar_246 · 10-28-2013, 12:05

try with atf jtag your problem solve

ilhom800 · 05-05-2015, 10:02

lumia 920 RM-820 full bin please help find

McFly123 · 01-16-2017, 11:15

I need help, after repair phone start with nokia logo on red background but i cant flash. Always have error:

Quote:

0xFA001106: Signature check of FFU file fails. Reason(s): The FFU file is not correctly signed or not signed for this device.

Log from RIFF

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.41 (RIFFBOX1), JTAG Manager Version: 1.63
Selected Resurrector: [Nokia Lumia 920 V1.0.5052.59094]

Connecting to the dead body...OK
Detected dead body ID: 0x706B40E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 8 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0090/0x014A (HBG4E, 0x000748000000 Bytes = 29.13 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0090/0x014A (HBG4E, 0x000000200000 Bytes = 2.00 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 29,13GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 29,12GB

Flashing the dead body...OK
Resurrection complete!

I think we need big boot repair like ATF have. Please help

10-28-2013, 10:30	#1 (permalink)
brokendreem No Life Poster Join Date: Nov 2009 Location: BaNgLaDeSh Age: 41 Posts: 807 Member: 1150957 Status: Offline Thanks Meter: 60	Lumia 920 boor repair problem Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.54 Selected Resurrector: [Nokia Lumia 920 V1.0.5040.1457] Connecting to the dead body...OK Detected dead body ID: 0x706B40E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is 4 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x02060035 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 29,12GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader. No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 29,12GB Flashing the dead body...

10-28-2013, 10:58	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	It appears that eMMC is not detected. What is phone history ?

10-28-2013, 12:05	#4 (permalink)
iftikhar_246 No Life Poster Join Date: Nov 2006 Location: pakistan Age: 39 Posts: 3,224 Member: 384949 Status: Offline Sonork: 1611265 Thanks Meter: 523	try with atf jtag your problem solve

05-05-2015, 10:02	#5 (permalink)
ilhom800 Junior Member Join Date: Apr 2014 Location: ok Age: 43 Posts: 12 Member: 2160749 Status: Offline Thanks Meter: 1	lumia 920 RM-820 full bin please help find