m259s boot repair error

[fazargsm]

pls any one can tel y this error??

pen serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Resurrector: [Samsung M250S V1.0.4990.45084]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0002AA400000 Bytes = 10.66 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)

No Resurrection Data is available for the eMMC Chip with Capacity = 10.66GB
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...OK
ERROR: DCC Loader has reported Error Code = 0x46 (0x000000). Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000

[legija]

You have to replace eMMC chip first.