M919 dead after resurrection Help!!!! - GSM-Forum

dj-eg · 04-29-2014, 14:04

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung M919 V1.0.4970.39097]

Connecting to the dead body...OK
Detected dead body ID: 0x2071B0E1 - IGNORED!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G94, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G94, 0x000000400000 Bytes = 4.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB

Flashing the dead body...OK
Resurrection complete!

before power on in logo brick, after resurrection M919 dead, i have the same problem with two M919, I have the full Dump "M919_1GB_Working.riffpbin" but i don't know, the procedure to install to S4

**legija** · 04-30-2014, 09:43

Hi,
Please read this to understand what is important to repair Samsung S3/S4 models after 4.3 version firmware and KNOX:

RIFF JTAG - Samsung S3, S4 KNOX Downgrade warning and repair instructions ! ! !

04-29-2014, 14:04	#1 (permalink)
dj-eg Freak Poster Join Date: Jun 2011 Location: Dominican Republic Posts: 219 Member: 1607116 Status: Offline Sonork: 100.1617729 Thanks Meter: 52	M919 dead after resurrection Help!!!! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung M919 V1.0.4970.39097] Connecting to the dead body...OK Detected dead body ID: 0x2071B0E1 - IGNORED! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0100 (016G94, 0x0003AB400000 Bytes = 14.68 GB) Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0100 (016G94, 0x000000400000 Bytes = 4.00 MB) Selected Resurrection Data for the eMMC Chip with Capacity = 14,68GB Flashing the dead body...OK Resurrection complete! before power on in logo brick, after resurrection M919 dead, i have the same problem with two M919, I have the full Dump "M919_1GB_Working.riffpbin" but i don't know, the procedure to install to S4

04-30-2014, 09:43	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, Please read this to understand what is important to repair Samsung S3/S4 models after 4.3 version firmware and KNOX: RIFF JTAG - Samsung S3, S4 KNOX Downgrade warning and repair instructions ! ! !