N7000 error - GSM-Forum

Aamir_Zia · 04-18-2012, 15:06

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.42
Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

BABAK NURI · 04-18-2012, 21:25

Hi

Your Problem Come From Hardware....Actually Flash chip..
DCC loader Can't detect eMMC.....How it got dead...???

Quote:

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

guy_askali · 08-07-2012, 13:39

i have same problem N7000 any solution for repair ?

guy_askali · 08-07-2012, 13:54

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - IGNORED!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

crackp0d · 11-21-2012, 10:05

I have also this same problem

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

BABAK NURI · 11-21-2012, 11:29

Hi
Only Solution is Replace New One Chip....

04-18-2012, 15:06	#1 (permalink)
Aamir_Zia No Life Poster Join Date: Dec 2003 Location: Karachi Pakistan Age: 27 Posts: 5,231 Member: 47321 Status: Offline Sonork: 100.54032 Thanks: 387 Thanked 309 Times in 91 Posts	N7000 error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.42 Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
where to find a working program all they have some errors ??	fondas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	2	12-12-2012 12:26
My 5110 v5.11 have a strange error.., it resets it self every 60second	luuk	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	24	08-11-2006 15:29
Avoid 3 times error code in Nokia 6185	X-plot	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	05-08-2000 20:24
The multiple errors of Winlock ... ???	Genata	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	09-20-1999 19:12
error (1002) simlock3.dll winopen	fondas	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	08-28-1999 15:57

08-07-2012, 13:39	#3 (permalink)
guy_askali No Life Poster Join Date: Nov 2006 Location: maldives Posts: 510 Member: 389862 Status: Offline Sonork: guy_askali Thanks: 101 Thanked 60 Times in 30 Posts	i have same problem N7000 any solution for repair ?

08-07-2012, 13:54	#4 (permalink)
guy_askali No Life Poster Join Date: Nov 2006 Location: maldives Posts: 510 Member: 389862 Status: Offline Sonork: guy_askali Thanks: 101 Thanked 60 Times in 30 Posts	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.33, JTAG Manager Version: 1.44 Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - IGNORED! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

11-21-2012, 10:05	#5 (permalink)
crackp0d No Life Poster Join Date: Aug 2007 Location: @crackp0d Age: 26 Posts: 508 Member: 571377 Status: Offline Sonork: 100.1608017 Thanks: 41 Thanked 133 Times in 78 Posts	I have also this same problem Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

11-21-2012, 11:29	#6 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 32 Posts: 5,098 Member: 131131 Status: Online Sonork: 100.1606847 Thanks: 522 Thanked 1,484 Times in 971 Posts	Hi Only Solution is Replace New One Chip....