n7000 hangs on logo after efs write

[sidramobilecare]

n7000 working well but baseband was null,
hangs on logo after efs write,
even full flashing with N7000DDLSC_ODDLSC_India_Android_4.1.2 not solved.

[11/22/2014 8:03:36 PM] [START OPERATION_ID = DCC_WRITE_MEMORY]
[11/22/2014 8:03:36 PM]
[11/22/2014 8:03:36 PM] Current Settings:
[11/22/2014 8:03:36 PM] -----------------
[11/22/2014 8:03:36 PM] Address: 000000400000
[11/22/2014 8:03:36 PM] Length: 000001400000
[11/22/2014 8:03:36 PM] Address Space: ROM1
[11/22/2014 8:03:36 PM] AutoFullFlash: UNCHECKED
[11/22/2014 8:03:36 PM] Use End Address: UNCHECKED
[11/22/2014 8:03:36 PM] ECC Module Enabled: UNCHECKED
[11/22/2014 8:03:36 PM] Image File is Used: UNCHECKED
[11/22/2014 8:03:36 PM] Use Address as Offset: UNCHECKED
[11/22/2014 8:03:36 PM] Main (CHECKED): C:\Documents and Settings\Admin\Desktop\N7000_GB_256MB_Live\n7000 256mb.bin
[11/22/2014 8:03:36 PM] Redu (UNCHECKED):
[11/22/2014 8:03:36 PM]
[11/22/2014 8:07:15 PM] Open serial port...OK
[11/22/2014 8:07:15 PM] Connecting to the RIFF Box...OK
[11/22/2014 8:07:15 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[11/22/2014 8:07:15 PM] Selected Resurrector: [Samsung N7000 V1.0.4860.58267]
[11/22/2014 8:07:15 PM]
[11/22/2014 8:07:15 PM] Connecting to the dead body...OK
[11/22/2014 8:07:15 PM] Detected dead body ID: 0x4BA00477 - CORRECT!
[11/22/2014 8:07:16 PM] Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz
[11/22/2014 8:07:16 PM] Settings Code: 0x20010B00000000400000000001400000
[11/22/2014 8:07:16 PM]
[11/22/2014 8:07:16 PM] Resurrection sequence started.
[11/22/2014 8:07:16 PM] Establish communication with the phone...OK
[11/22/2014 8:07:16 PM] Initializing internal hardware configuration...OK
[11/22/2014 8:07:16 PM] Uploading resurrector data into memory...OK
[11/22/2014 8:07:16 PM] Starting communication with resurrector...OK
[11/22/2014 8:07:16 PM]
[11/22/2014 8:07:16 PM] Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
[11/22/2014 8:07:16 PM] Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (VYL00M, 0x000000080000 Bytes = 0.50 MB)
[11/22/2014 8:07:16 PM]
[11/22/2014 8:07:16 PM] Writting FLASH1 memory from 0x000000400000 to 0x0000017FFFFF
[11/22/2014 8:07:16 PM] Completed in 00:03:37.859 (Average Transfer Rate: 94.01 kB/s)
[11/22/2014 8:07:16 PM] [FINISH OPERATION_ID = DCC_WRITE_MEMORY]

how to recover please
thanks

[sidramobilecare]

written EFS as per babak nuri sir's instruction

Guide:

1-Select "Speed"
2-Select "N7000" Model
3-Set "Start Address" "Data Length"

Start Address : "0x0000 0040 0000"
Lentgh : "0X0000 0140 0000"

4-Uncheck 3 option...Select "Rom1"
5-Open "Dump File" in "Main" Window
6-Select "Use Adress as Offset xxxxxx"
7-Press "write"

but after efs write it hangs on logo