n7000 problem - GSM-Forum

alidoran · 11-13-2012, 15:05

hi
my good phone after flash for change language dead and when write pit break
i want to RP by riff but receive this error.

WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)

i tested it by n7000_boot.bin file but my problem not solved
plz show new solution.
my phone good before flash and i am sure my chip is ok and my problem is software.

algerienbox · 11-13-2012, 15:20

http://forum.gsmhosting.com/vbb/f634...ution-1508808/

RIFF JTAG Box FAQ - ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF 0x010000)

alidoran · 11-13-2012, 15:58

Quote:

Originally Posted by algerienbox

http://forum.gsmhosting.com/vbb/f634...ution-1508808/

RIFF JTAG Box FAQ - ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF 0x010000)

i test method 1 and dont work in this phone
method 2 not for my phone.i am sure my problem is software

**legija** · 11-13-2012, 16:57

Quote:

Originally Posted by alidoran

i test method 1 and dont work in this phone
method 2 not for my phone.i am sure my problem is software

Hi,
You need to replace eMMC. It's up to You to believe what You want, but that is the hardware problem.

alidoran · 11-14-2012, 12:39

Quote:

Originally Posted by legija

Hi,
You need to replace eMMC. It's up to You to believe what You want, but that is the hardware problem.

thank you for reply but my phone was ok.
dead by change language.how to damage hardware?!!!

BABAK NURI · 11-14-2012, 13:32

Hi
Nobody know why..?But This is Possible and i see alot phone with dead by wrong SW or suddenly and HW is fault
ANyway,You Need Replace eMMC by New One and Your phone Back To Life

11-13-2012, 15:05	#1 (permalink)
alidoran No Life Poster Join Date: May 2005 Location: iran Age: 43 Posts: 560 Member: 143648 Status: Offline Thanks Meter: 179	n7000 problem hi my good phone after flash for change language dead and when write pit break i want to RP by riff but receive this error. WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess. ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000) i tested it by n7000_boot.bin file but my problem not solved plz show new solution. my phone good before flash and i am sure my chip is ok and my problem is software.

11-13-2012, 15:20	#2 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	http://forum.gsmhosting.com/vbb/f634...ution-1508808/ RIFF JTAG Box FAQ - ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF 0x010000)

11-14-2012, 13:32	#6 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Nobody know why..?But This is Possible and i see alot phone with dead by wrong SW or suddenly and HW is fault ANyway,You Need Replace eMMC by New One and Your phone Back To Life