N7000 replaced new flash chip

[BesTCooL]

I change incredible s and desire s without problem but n7000 have problem

N7000 replaced flash chip but nand flash chip 4GB ı need repartition for 4gb

any way

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.33, JTAG Manager Version: 1.44
Selected Resurrector: [Samsung N7000 AP V1.0.4458.16492]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.79V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0002/0x0001 (SEM04G, 0x0000EC000000 Bytes = 3.69 GB)

Flashing the dead body...
WARNING: Programming Error (0x25) at 0x000000000000 is handled as Cut Excess.
ERROR: DCC Loader has reported Error Code = 0x3E (0x007FFF <> 0x010000)

[BesTCooL]

HTC nand flash chip change without problem


Index of /upload/desirehd

http://img687.imageshack.us/img687/5854/dsc4272y.jpg

http://www.bestgsmsupport.com/upload...s/DSC_4519.JPG

http://www.bestgsmsupport.com/upload...s/DSC_4529.JPG

http://www.bestgsmsupport.com/upload...s/DSC_4536.JPG

[LoveLess]

Originally Posted by BesTCooL

HTC nand flash chip change without problem


Index of /upload/desirehd

http://img687.imageshack.us/img687/5854/dsc4272y.jpg

http://www.bestgsmsupport.com/upload...s/DSC_4519.JPG

http://www.bestgsmsupport.com/upload...s/DSC_4529.JPG

http://www.bestgsmsupport.com/upload...s/DSC_4536.JPG

you know this job sir.. now u have to repartiation it..? what is flash size now..?

[BesTCooL]

my flash chip size SEM04G, 0x0000EC000000

normally note flash sizes

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0001 (VYL00M, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0001 (VYL00M, 0x000000080000 Bytes = 0.50 MB)