n7000 ressurect failed - GSM-Forum

ham_sang · 04-26-2014, 13:12

Hi,

Failed ressurect with Error.Is it eMMC problem ?

PHP Code:

  Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.54
Selected Resurrector: [Samsung N7000 V1.0.4860.58267]

Connecting to the dead body...OK
Detected dead body ID: 0x4BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048

No Resurrection Data is available for the eMMC Chip with Capacity = 0B
WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

WBR

**legija** · 04-26-2014, 13:29

Yes, this is the eMMC problem, You have to replace it.

ham_sang · 04-26-2014, 15:14

Quote:

Originally Posted by legija

Yes, this is the eMMC problem, You have to replace it.

Alright,thanks alot

WBR

04-26-2014, 13:12	#1 (permalink)
ham_sang No Life Poster Join Date: Nov 2008 Posts: 714 Member: 901472 Status: Offline Thanks Meter: 48	n7000 ressurect failed Hi, Failed ressurect with Error.Is it eMMC problem ? PHP Code: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.54 Selected Resurrector: [Samsung N7000 V1.0.4860.58267] Connecting to the dead body...OK Detected dead body ID: 0x4BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000048 No Resurrection Data is available for the eMMC Chip with Capacity = 0B WARNING!!! Using Resurrection Data for the eMMC Chip with Capacity = 14.68GB ERROR: Selected FLASH Chip was not initialized by the DCC Loader. WBR

04-26-2014, 13:29	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Yes, this is the eMMC problem, You have to replace it.