Hi,
I have a LG F160L when starting is show a screen "Enter password to decrypted memory"
I can erase the flash but i can't resurrect, riff always say error
Please help me to get full dump, maybe it luck
Quote:
[26/06/2013 08:33:54] [START OPERATION_ID = DCC_ERASE_MEMORY]
[26/06/2013 08:41:21] Open serial port...OK
[26/06/2013 08:41:21] Connecting to the RIFF Box...OK
[26/06/2013 08:41:21] Firmware Version: 1.35, JTAG Manager Version: 1.49
[26/06/2013 08:41:21] Selected Resurrector: [LG F160L V1.0.4693.39]
[26/06/2013 08:41:21]
[26/06/2013 08:41:21] Connecting to the dead body...OK
[26/06/2013 08:41:21] Detected dead body ID: 0x406B10E1 - CORRECT!
[26/06/2013 08:41:21] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[26/06/2013 08:41:21] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[26/06/2013 08:41:21] Settings Code: 0x050100090000000000000003AB400000
[26/06/2013 08:41:21]
[26/06/2013 08:41:21] Resurrection sequence started.
[26/06/2013 08:41:21] Establish communication with the phone...OK
[26/06/2013 08:41:21] Initializing internal hardware configuration...OK
[26/06/2013 08:41:21] Uploading resurrector data into memory...OK
[26/06/2013 08:41:21] Starting communication with resurrector...OK
[26/06/2013 08:41:21]
[26/06/2013 08:41:21] Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0000 (016G8B, 0x0003AB400000 Bytes = 14.68 GB)
[26/06/2013 08:41:21] Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0000 (016G8B, 0x000000200000 Bytes = 2.00 MB)
[26/06/2013 08:41:21]
[26/06/2013 08:41:21] Erasing FLASH1 memory from 0x000000000000 to 0x0003AB3FFFFF...OK
[26/06/2013 08:41:21] Completed in 00:07:25.555 (Average Transfer Rate: 34538.21 kB/s)
[26/06/2013 08:41:21] [FINISH OPERATION_ID = DCC_ERASE_MEMORY]
|
Quote:
[26/06/2013 08:41:45] [START OPERATION_ID = RESURRECT]
[26/06/2013 08:41:50] Open serial port...OK
[26/06/2013 08:41:50] Connecting to the RIFF Box...OK
[26/06/2013 08:41:50] Firmware Version: 1.35, JTAG Manager Version: 1.49
[26/06/2013 08:41:50] Selected Resurrector: [LG F160L V1.0.4693.39]
[26/06/2013 08:41:50]
[26/06/2013 08:41:50] Connecting to the dead body...OK
[26/06/2013 08:41:50] Detected dead body ID: 0x406B10E1 - CORRECT!
[26/06/2013 08:41:50] Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
[26/06/2013 08:41:50] Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
[26/06/2013 08:41:50]
[26/06/2013 08:41:50] Resurrection sequence started.
[26/06/2013 08:41:50] Establish communication with the phone...OK
[26/06/2013 08:41:50] Initializing internal hardware configuration...OK
[26/06/2013 08:41:50] Uploading resurrector data into memory...OK
[26/06/2013 08:41:50] Starting communication with resurrector...OK
[26/06/2013 08:41:50]
[26/06/2013 08:41:50] Detected an Initialized FLASH1 Chip, ID: 0x0011/0x0000 (016G8B, 0x0003AB400000 Bytes = 14.68 GB)
[26/06/2013 08:41:50] Detected an Initialized FLASH2 Chip, ID: 0x0011/0x0000 (016G8B, 0x000000200000 Bytes = 2.00 MB)
[26/06/2013 08:41:50]
[26/06/2013 08:41:50] Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB
[26/06/2013 08:41:50]
[26/06/2013 08:41:50] Flashing the dead body...
[26/06/2013 08:41:50] ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
[26/06/2013 08:41:50] ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
[26/06/2013 08:41:50] ERROR: DCC Loader has reported Error Code = 0x35 (0x000000). Trying to recover...OK
[26/06/2013 08:41:50] ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
[26/06/2013 08:41:50] [FINISH OPERATION_ID = RESURRECT]
|