need help for dead boot i7500 - GSM-Forum

sen-i · 08-06-2010, 08:02

hi team need help , i have i7500 1 with dead boot , and 2 ok , how can i repaird it myselfs , or how many time to wait support for this model? plz levsha help

levsha · 08-06-2010, 10:51

Contact me privately, please.
ICQ: 169555575
Skype: levsha2006

BR
levsha

sen-i · 08-14-2010, 06:55

can be closed , we have repaited boot with riff box , thanks for support legija and team

DUSKnenixs · 10-04-2010, 22:16

I7500 CAN´T REPAIR BOOT.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Model selected: SAMSUNG - Samsung I7500

Detected dead body ID: 0x301700E1

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x301700E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data length received.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Halting target...OK
STATUS: Target is halted.

R0 = 0x00000000 R6 = 0x8000AA78 R12 = 0xFFFF4F13
R1 = 0x0000008C R7 = 0x8000AA84 R13 = 0x01003E10
R2 = 0xA9B00000 R8 = 0x8000AA78 R14 = 0xFFFF2600
R3 = 0x00000104 R9 = 0x00000000 R15 = 0xFFFF2614
R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x800000D3
R5 = 0x8000AA98 R11 = 0x00000000

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 10 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...
ERROR: No response from the ramloader. Terminating at 0x00000000

DUSKnenixs · 10-04-2010, 22:28

Quote:

Originally Posted by DUSKnenixs

I7500 CAN´T REPAIR BOOT.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Model selected: SAMSUNG - Samsung I7500

Detected dead body ID: 0x301700E1

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the target...OK
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x301700E1, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: Wrong DCC data length received.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Halting target...OK
STATUS: Target is halted.

R0 = 0x00000000 R6 = 0x8000AA78 R12 = 0xFFFF4F13
R1 = 0x0000008C R7 = 0x8000AA84 R13 = 0x01003E10
R2 = 0xA9B00000 R8 = 0x8000AA78 R14 = 0xFFFF2600
R3 = 0x00000104 R9 = 0x00000000 R15 = 0xFFFF2614
R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x800000D3
R5 = 0x8000AA98 R11 = 0x00000000

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is 10 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...
ERROR: No response from the ramloader. Terminating at 0x00000000

BAD SOLDERING CABLES PINOUT

SOLVED:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I7500]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 2 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...OK
Resurrection complete!

RIOPHONE · 07-24-2012, 01:13

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung I7500 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

08-06-2010, 08:02	#1 (permalink)
sen-i Freak Poster Join Date: Nov 2008 Posts: 268 Member: 906499 Status: Offline Sonork: sen-i Thanks Meter: 47	need help for dead boot i7500 hi team need help , i have i7500 1 with dead boot , and 2 ok , how can i repaird it myselfs , or how many time to wait support for this model? plz levsha help Last edited by levsha; 08-06-2010 at 10:52.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

08-06-2010, 10:51	#2 (permalink)
levsha No Life Poster Join Date: Mar 2002 Location: gsmcity Age: 45 Posts: 826 Member: 10505 Status: Offline Sonork: 100.40828 Thanks Meter: 364	Contact me privately, please. ICQ: 169555575 Skype: levsha2006 BR levsha

08-14-2010, 06:55	#3 (permalink)
sen-i Freak Poster Join Date: Nov 2008 Posts: 268 Member: 906499 Status: Offline Sonork: sen-i Thanks Meter: 47	can be closed , we have repaited boot with riff box , thanks for support legija and team

10-04-2010, 22:16	#4 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	I7500 CAN´T REPAIR BOOT. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I7500] Connecting to the dead body...OK Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Model selected: SAMSUNG - Samsung I7500 Detected dead body ID: 0x301700E1 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I7500] Connecting to the target...OK Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Following devices are found on the JTAG chain: Device on TAP #0: ID = 0x301700E1, IR Length = 0x04 bits Total IR length: 0x0004 bits Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I7500] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...FAILED ERROR: Wrong DCC data length received. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I7500] Halting target...OK STATUS: Target is halted. R0 = 0x00000000 R6 = 0x8000AA78 R12 = 0xFFFF4F13 R1 = 0x0000008C R7 = 0x8000AA84 R13 = 0x01003E10 R2 = 0xA9B00000 R8 = 0x8000AA78 R14 = 0xFFFF2600 R3 = 0x00000104 R9 = 0x00000000 R15 = 0xFFFF2614 R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x800000D3 R5 = 0x8000AA98 R11 = 0x00000000 Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I7500] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is 10 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB) Flashing the dead body... ERROR: No response from the ramloader. Terminating at 0x00000000

07-24-2012, 01:13	#6 (permalink)
RIOPHONE No Life Poster Join Date: Apr 2006 Location: SFAX/TUNISIA Age: 48 Posts: 1,454 Member: 266765 Status: Offline Sonork: +21624131501 Thanks Meter: 336	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.43 Selected Resurrector: [Samsung I7500 V1.00] Connecting to the dead body...OK Detected dead body ID: 0x301700E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...FAILED ERROR: RAM memory selftest failed.