need help to fix shv-e160s

[bimes]

cannot repair this set
need help to fix it

with e160l

[10/26/2014 3:55:03 PM] [START OPERATION_ID = RESURRECT]
[10/26/2014 3:55:04 PM] Open serial port...OK
[10/26/2014 3:55:04 PM] Connecting to the RIFF Box...OK
[10/26/2014 3:55:04 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[10/26/2014 3:55:04 PM] Selected Resurrector: [Samsung E160L V1.0.4637.58162]
[10/26/2014 3:55:04 PM] 
[10/26/2014 3:55:04 PM] Connecting to the dead body...OK
[10/26/2014 3:55:04 PM] Detected dead body ID: 0x106A10E1 - WRONG!!!
[10/26/2014 3:55:04 PM] ERROR: Current ID does not belong to the Samsung E160L family.
[10/26/2014 3:55:04 PM] [FINISH OPERATION_ID = RESURRECT]

with e160k

[10/26/2014 3:57:21 PM] [START OPERATION_ID = RESURRECT]
[10/26/2014 3:57:25 PM] Open serial port...OK
[10/26/2014 3:57:25 PM] Connecting to the RIFF Box...OK
[10/26/2014 3:57:25 PM] Firmware Version: 1.37, JTAG Manager Version: 1.56
[10/26/2014 3:57:25 PM] Selected Resurrector: [Samsung E160K V1.0.4535.7001]
[10/26/2014 3:57:25 PM] 
[10/26/2014 3:57:25 PM] Connecting to the dead body...OK
[10/26/2014 3:57:25 PM] Detected dead body ID: 0x106A10E1 - IGNORED!
[10/26/2014 3:57:25 PM] Set I/O Voltage reads as 1.80V, TCK Frequency is 8 MHz
[10/26/2014 3:57:25 PM] 
[10/26/2014 3:57:25 PM] Resurrection sequence started.
[10/26/2014 3:57:25 PM] Establish communication with the phone...OK
[10/26/2014 3:57:25 PM] Initializing internal hardware configuration...OK
[10/26/2014 3:57:25 PM] Uploading resurrector data into memory...OK
[10/26/2014 3:57:25 PM] Starting communication with resurrector...FAILED
[10/26/2014 3:57:25 PM] ERROR: Wrong DCC data length received.
[10/26/2014 3:57:25 PM] [FINISH OPERATION_ID = RESURRECT]

other users have repaired their sets
here http://forum.gsmhosting.com/vbb/f634...-done-1788660/

and here http://forum.gsmhosting.com/vbb/f634...-help-1649186/