need help i9001 - GSM-Forum

BABAK NURI · 11-12-2011, 11:03

hi
i can't repair 9001 SL....
this id supported or not??? ID: 0x27B360E1

some times this error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung I9001]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000035

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

but usally give error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung I9001]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

BABAK NURI · 11-12-2011, 11:44

this is video.....
http://hotfile.com/dl/134801146/e202878/i9001.swf.html

or

http://megaswf.com/serve/1257280

Akeo · 04-29-2012, 12:50

Found any solution for this problem? I have exactly same error...Thanks!

BABAK NURI · 04-29-2012, 22:06

Quote:

Originally Posted by Akeo

Found any solution for this problem? I have exactly same error...Thanks!

Hi.....Yes.....You Need Replace eMMC Chip

Akeo · 04-30-2012, 20:52

Thank You @BABAK NURI! You have tried to warm up before change it ?

BABAK NURI · 04-30-2012, 22:36

Quote:

Originally Posted by Akeo

Thank You @BABAK NURI! You have tried to warm up before change it ?

Hi
Usually eMMC chip in Galaxy's Series have a Glu......so,rehot chip is not good idea

anyway......i did it with changed eMMC.....

tikuh · 11-06-2012, 12:52

Quote:

Originally Posted by BABAK NURI

hi
i can't repair 9001 SL....
this id supported or not??? ID: 0x27B360E1

some times this error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung I9001]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000035

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.

but usally give error

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [Samsung I9001]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...FAILED
ERROR: No response from the RIFF Box.

same to me boss , but it done using nokia battery lol

llcoolr · 11-25-2012, 12:22

Quote:

Originally Posted by tikuh

same to me boss , but it done using nokia battery lol

are u joking or what
nokia battery.......????

BABAK NURI · 11-25-2012, 14:25

Hi
Actually No Need Battrey,Usually Only Needed USB Cable...

llcoolr · 11-25-2012, 18:01

need full dump
not found on tracker

BABAK NURI · 11-26-2012, 13:54

Quote:

Originally Posted by llcoolr

need full dump
not found on tracker

Hi
This is old my topic and closed for now
---
Please open new topic and explain about your problem...
Log File
Phone History

Thanks

11-12-2011, 11:03	#1 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	need help i9001 hi i can't repair 9001 SL.... this id supported or not??? ID: 0x27B360E1 some times this error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Samsung I9001] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000035 ERROR: Selected FLASH Chip was not initialized by the DCC Loader. but usally give error Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [Samsung I9001] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 6 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...FAILED ERROR: No response from the RIFF Box.

11-12-2011, 11:44	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	this is video..... http://hotfile.com/dl/134801146/e202878/i9001.swf.html or http://megaswf.com/serve/1257280 Last edited by BABAK NURI; 11-12-2011 at 11:54.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

04-29-2012, 12:50	#3 (permalink)
Akeo Insane Poster Join Date: Dec 2006 Location: Toplita Romana Posts: 62 Member: 419497 Status: Offline Sonork: 100.1615725 Thanks Meter: 5	Found any solution for this problem? I have exactly same error...Thanks!

04-30-2012, 20:52	#5 (permalink)
Akeo Insane Poster Join Date: Dec 2006 Location: Toplita Romana Posts: 62 Member: 419497 Status: Offline Sonork: 100.1615725 Thanks Meter: 5	Thank You @BABAK NURI! You have tried to warm up before change it ?

11-25-2012, 14:25	#9 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Actually No Need Battrey,Usually Only Needed USB Cable...

11-25-2012, 18:01	#10 (permalink)
llcoolr No Life Poster Join Date: Feb 2004 Location: DZ W09 Age: 43 Posts: 3,607 Member: 53408 Status: Offline Sonork: 100.1593951 Thanks Meter: 1,261	need full dump not found on tracker