Need help with S5830I - GSM-Forum

sebasto · 04-26-2012, 22:43

Hi all,

I need help with a S5830I with damaged boot.
I probe to repair this with Riff but I get this error:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.42
Selected Resurrector: [Samsung S5830i V1.0.4476.13359]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - IGNORED!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 4KB

Flashing the dead body...OK
WARNING: Programming Error (0x24) at 0x000001300000 is handled as Cut Excess.
Resurrection complete!

When I probe to erase phone I get this :

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.42
Selected Resurrector: [Samsung S5830i V1.0.4476.13359]

Connecting to the dead body...OK
Detected dead body ID: 0x07B3617F - IGNORED!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x05010000000000000000000020000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)

Erasing FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF...OK
WARNING: Erasing Error (0x24) at 0x000000B40000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000001300000 is Ignored. Erase continues.
Completed in 00:00:09.189 (Average Transfer Rate: 57056.05 kB/s)

And I dont have possibility to repair the phone
Please help me.

Thanks a lot.

Sebasto.

BABAK NURI · 04-27-2012, 12:17

Hi
What is a phone history?

Also,,do you have full dump? or do you have another working phone?

04-26-2012, 22:43	#1 (permalink)
sebasto Insane Poster Join Date: Jun 2004 Location: Panama Age: 48 Posts: 68 Member: 68760 Status: Offline Thanks Meter: 5	Need help with S5830I Hi all, I need help with a S5830I with damaged boot. I probe to repair this with Riff but I get this error: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.42 Selected Resurrector: [Samsung S5830i V1.0.4476.13359] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - IGNORED! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Selected Resurrection Data for the NAND Chip with Page size = 4KB Flashing the dead body...OK WARNING: Programming Error (0x24) at 0x000001300000 is handled as Cut Excess. Resurrection complete! When I probe to erase phone I get this : Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.32, JTAG Manager Version: 1.42 Selected Resurrector: [Samsung S5830i V1.0.4476.13359] Connecting to the dead body...OK Detected dead body ID: 0x07B3617F - IGNORED! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x05010000000000000000000020000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Erasing FLASH1 memory from 0x000000000000 to 0x00001FFFFFFF...OK WARNING: Erasing Error (0x24) at 0x000000B40000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x000001300000 is Ignored. Erase continues. Completed in 00:00:09.189 (Average Transfer Rate: 57056.05 kB/s) And I dont have possibility to repair the phone Please help me. Thanks a lot. Sebasto.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

04-27-2012, 12:17	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi What is a phone history? Also,,do you have full dump? or do you have another working phone?