RIFF HTC via USB cable support - Important information !

[Farzad.m]

Originally Posted by kasra

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire HD via USB V1.0.4498.3794]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...

are u used this tp?

[BABAK NURI]

Originally Posted by kasra

itried with ace (desire hd) after Resurrection nothing changed!!
anyone test Resurrection with usb i think its a joke

Hi kasra
Yes,it's a joke ...but this joke repaired 5set incredible-s also 3 set DHD..for me....today

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Incredible S V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x22010000000000000000000010000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (000000, 0x0001E0000000 Bytes = 7.50 GB)

Resuming write FLASH1 memory from 0x000000000000 to 0x00000FFFFFFF on 0x000008680000

[BABAK NURI]

Originally Posted by kasra

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire HD via USB V1.0.4498.3794]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...

Hi
This is error for "M4G2DE"....You can't repair ...you need replace it...

[BABAK NURI]

@ kasra
Why not checked "DCC Loader USB Interface"?

[wellcare]

now you see i know riff team doing the best of the best now its time to more development by usb and time will come no testpoint happen in unlocking only.i know team make more easy by unlocking.dead boot phone testpoint so we make money by hard work...cause in unlocking plenty box reading codes only, easy so please make it easy also team even in unlocking only...your the BEST TEAM....

[kasra]

Originally Posted by Farzad.m

are u used this tp?

no i didnt use tp when i connect phone with usb phone detected like this

[BABAK NURI]

Originally Posted by kasra

with "DCC Loader USB Interface" checked same problem
waiting 1/5 2/5 3/5 4/5 5/5 and nothing happend!!

I think you need replace eMMC chip.......
Also,do you see stop on 5% when resurrect via interface jtag?and see "M4G2DE" in your log?

can you post full log(repair phone via jtag)?

[Akeo]

Originally Posted by legija

Hi,

This means that RIFF DCCLoader didn't started properly. It can be caused by insufficient power, bad USB cable, or simply by broken phone hardware.

- Check which USB cable type You are using, chinese cables might not work correctly
- Make sure that phone is properly powered
- Try changing USB port

As for how to troubleshoot phone hardware it self, for now I have no info, since I can not emulate this problem here my self.

When i use tp connection, i don't have problem with USB not recognized, but i have this error:


I think i have eMMC faulty... Is someone which had this problem??

[dvdaio]

same error with me on 2 desire hd and 1 desire s i didn't knwo where is the problem is the test point need it or not or what all things i tried and it is the same

[ismael_mj23]

Where Can I find the Testpoint picture for HTC Inspire?? Phone is not recognized by usb, it only vibrates!!

[legija]

Originally Posted by Akeo

When i use tp connection, i don't have problem with USB not recognized, but i have this error:


I think i have eMMC faulty... Is someone which had this problem??

It's clear that eMMC is dead. You can replace it from any other similar phone, even with eMMC from Nokia.

[oodboo]

Hi!
Problem with resurrection Desire HD, i can't resurrect
What am I doing wrong? and how to install the driver QHUSB_DLOAD
screen

"Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire HD via USB V1.0.4498.3794]

Looking for the HS-USB QDLoader Interface...ERROR
ERROR: Cannot Find Qualcomm HS-USB QDLoader Interface COM Port"
OS Win 7 (32)

[Duumon]

what test point for HTC Incredible S? Show a picture

[CELL SOLUTIONS]

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire S via USB V1.0.4498.1830]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x00000035

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.


MY FONE IS HANG ON HTC LOGO ....

[Farzad.m]

Thanks Riff Team
Desire HD Done
but not with this tp:



i will upload currect tp for desire hd