Newbie in RIFF HTC DESIRE S Need Help!!

[ferhel]

I Always Got This Error even i play RTCK Speed

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire S V1.0.4498.3182]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is 100 kHz

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.

Tried via HTC Desire S Via USB

Logs

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire S via USB V1.0.4498.1830]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...

but still Dead cant go to Recovery Mode

i think need to flash Dump, please give Procedure how to flash dump step by step


thanks

[legija]

Working via USB requires strict procedure to be followed:

1. Connect TP to GND
2. Connect battery and usb cable
3. As soon QDLOADER is detected on USB Port, disconnect TP from GND
4. Execute desired operation

Starting communication with resurrector...

At this point phone is restarted and should be enumerated as new device. In case that phone is detected as "Unknown Device" - You'll need first to replace eMMC chip, if You followed all instruction properly from start.

[legija]

Working via USB requires strict procedure to be followed:

1. Connect TP to GND
2. Connect battery and usb cable
3. As soon QDLOADER is detected on USB Port, disconnect TP from GND
4. Execute desired operation

Starting communication with resurrector...

At this point phone is restarted and should be enumerated as new device. In case that phone is detected as "Unknown Device" - You'll need first to replace eMMC chip, if You followed all instruction properly from start.

[ferhel]

@legija

Do i need to Use T.P in my phone even if QDLOADER is already detect when i insert USB cable.?

Where is T.P in my Device

[ferhel]

Any Idea, do i have to use T.P method even if QDLOADER is detected when i insert usb cable in device

[ferhel]

Waiting for reply............................................. ..............

[legija]

Is it so big problem to follow simple manual ?
Follow above mention steps, and report the result.

[ferhel]

Is it so big problem to follow simple manual ?
Follow above mention steps, and report the result.

I'm Newbie in RIFF i bought my Riff yesterday and this is my First time using it kindly make some Screenshot how to do it. this HTC is detected in Device manager as QDLOADER i successfully install driver but every time i press resurrection button i got this logs and nothing happen, i don't know what next step will i do, so kindly make some screen shot so i can follow easy i'm sorry i'm just a newbie

and one more Question do i need to T.P my device it's already detected in device manager

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [HTC Desire S via USB V1.0.4498.1830]

Looking for the HS-USB QDLoader Interface...OK
Open the HS-USB QDLoader Interface Port...OK

Establish connection with the Device...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...

[ferhel]

ok i get it now what you mean after restart my PC say's device not recognize you think this is hardware problem i'll try in my other computer tomorrow i think i have problem on my Usb port, it happen every time post result tomorrow


thanks

[Sniper_04]

legija's said
Working via USB requires strict procedure to be followed:

1. Connect TP to GND
2. Connect battery and usb cable
3. As soon QDLOADER is detected on USB Port, disconnect TP from GND
4. Execute desired operation

and one more Question do i need to T.P my device it's already detected in device manager

it means no need to connect the TP...because phone is detected on USB Port(QDLOADER)

OT:
ito na yata yung sagot at kahahantungan ng desire mo

At this point phone is restarted and should be enumerated as new device. In case that phone is detected as "Unknown Device" - You'll need first to replace eMMC chip, if You followed all instruction properly from start.

[ferhel]

@Sniper_04

Aw wag naman sana Device not recognize palang naman nakita ko hindi pa unknown hehe!
may problema kasi yung comport ng pc ko try ko sa laptop bukas update kita

Post result tommorow