Nexus One dead Resurrection complete but phone still dead. - GSM-Forum

Salman Raisi · 02-03-2011, 12:02

Hi,

NEXUS ONE dead i tryed to repair with riff box Resurrection complete . but phone still dead.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [HTC Nexus]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

any idea?

salman

galijus · 02-03-2011, 13:12

do resurrection again with imei repair and reflash total htc partition ticked,after full flash trough gold card method,post result.

Salman Raisi · 02-03-2011, 13:46

Quote:

Originally Posted by galijus

do resurrection again with imei repair and reflash total htc partition ticked,

already did but no luck phone is dead not even go in boot loader

i tryed also unlock using riff box

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [HTC Nexus]
Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
Unlocking the Phone...FAILED
ERROR: Failed send data to resurrector. Terminating.

Quote:

Originally Posted by galijus

after full flash trough gold card method,post result.

press power + volum down button

phone not going to bootloader

than how i can try to flash ?

even not detect in usb

salman.

Salman Raisi · 02-04-2011, 11:16

any one have nexus one full dump ../?

Salman Raisi · 02-04-2011, 14:11

i even checked in hardware board is clean.

what can be the problem ?

**legija** · 02-04-2011, 14:34

Hi,

I have full nexus backup, contact me via Sonork please.

..::Thanh_gsm::.. · 04-06-2011, 11:26

Quote:

Originally Posted by legija

Hi,

I have full nexus backup, contact me via Sonork please.

Pls upload link pls mr Legija. Thanks

dmaetrey · 04-15-2011, 04:10

i have completely resurrect, but when i power it onn it will have an X with different colors........

what should i do next???

gerovgsm · 04-19-2011, 11:54

I need Nexus One full backup, can you give me your dumb?

Tnx & Regards

BesTCooL · 04-20-2011, 01:22

Quote:

Originally Posted by dmaetrey

i have completely resurrect, but when i power it onn it will have an X with different colors........

what should i do next???

enter fastboot mode and PC detect?

dmaetrey · 04-23-2011, 04:27

Quote:

Originally Posted by BesTCooL

enter fastboot mode and PC detect?

THERES A POP UP uNKNOWN DEVICE

MUTUAL · 05-02-2011, 08:27

i m having same problem after resurrection stil same

Quote:

] Resurrection sequence started.
[5/2/2011 7:12:51 PM] Establish communication with the phone...OK
[5/2/2011 7:12:51 PM] Initializing internal hardware configuration...OK
[5/2/2011 7:12:51 PM] Uploading resurrector data into memory...OK
[5/2/2011 7:12:51 PM] Starting communication with resurrector...OK
[5/2/2011 7:12:51 PM]
[5/2/2011 7:12:51 PM] Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
[5/2/2011 7:12:51 PM] Flashing the dead body...OK
[5/2/2011 7:12:51 PM] Resurrection complete!
[5/2/2011 7:12:51 PM] [FINISH OPERATION_ID = RESURRECT]

phone is stil dead

BouRRi_GSM · 05-02-2011, 20:50

what's the phone history? how it's dead?

br

MUTUAL · 05-02-2011, 23:19

Quote:

Originally Posted by BouRRi_GSM

what's the phone history? how it's dead?

br

phone cam dead customer was using night he put in charger after morning time he found out phone not turning on when i put in charge i can only see orange light nothing als and when i try jtag u can see i can read the phone.
so what do u thing what should i do?

BouRRi_GSM · 05-04-2011, 14:03

try to check power button if it's working or not (just connect phone to power supply and press power, and u can see if phone consume current).

if it's ok, and phone dead suddenly, maybe it's hardware problem. cause as i know rarely or maybe never android, windows... phones completely dead by them self due to software problem.

br

02-03-2011, 12:02	#1 (permalink)
Salman Raisi Freak Poster Join Date: May 2008 Location: Dubai Age: 35 Posts: 229 Member: 771979 Status: Offline Sonork: 100.1676605 Thanks Meter: 55	Nexus One dead Resurrection complete but phone still dead. Hi, NEXUS ONE dead i tryed to repair with riff box Resurrection complete . but phone still dead. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.16, JTAG Manager Version: 1.22 Selected Resurrector: [HTC Nexus] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete! any idea? salman

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
my 8810 is phone locked ,can somebody please help	duyphuc	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	18	12-23-2014 09:03
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36

02-03-2011, 13:12	#2 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	do resurrection again with imei repair and reflash total htc partition ticked,after full flash trough gold card method,post result.

02-04-2011, 11:16	#4 (permalink)
Salman Raisi Freak Poster Join Date: May 2008 Location: Dubai Age: 35 Posts: 229 Member: 771979 Status: Offline Sonork: 100.1676605 Thanks Meter: 55	any one have nexus one full dump ../?

02-04-2011, 14:11	#5 (permalink)
Salman Raisi Freak Poster Join Date: May 2008 Location: Dubai Age: 35 Posts: 229 Member: 771979 Status: Offline Sonork: 100.1676605 Thanks Meter: 55	i even checked in hardware board is clean. what can be the problem ?

02-04-2011, 14:34	#6 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Hi, I have full nexus backup, contact me via Sonork please.

04-15-2011, 04:10	#8 (permalink)
dmaetrey No Life Poster Join Date: Jul 2006 Posts: 1,138 Member: 315550 Status: Offline Thanks Meter: 110	i have completely resurrect, but when i power it onn it will have an X with different colors........ what should i do next???

04-19-2011, 11:54	#9 (permalink)
gerovgsm No Life Poster Join Date: Feb 2004 Location: Bulgaria Age: 57 Posts: 531 Member: 52180 Status: Offline Thanks Meter: 47	I need Nexus One full backup, can you give me your dumb? Tnx & Regards

05-02-2011, 20:50	#13 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	what's the phone history? how it's dead? br

05-04-2011, 14:03	#15 (permalink)
BouRRi_GSM Registered User Join Date: Jan 2005 Location: TuNiSiA Age: 43 Posts: 4,342 Member: 111457 Status: Offline Thanks Meter: 967	try to check power button if it's working or not (just connect phone to power supply and press power, and u can see if phone consume current). if it's ok, and phone dead suddenly, maybe it's hardware problem. cause as i know rarely or maybe never android, windows... phones completely dead by them self due to software problem. br