nokia x sucess repair but can't flash - GSM-Forum

ahwak · 05-12-2015, 19:19

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [Nokia X RM-980 V1.01 by <Babak Nuri>]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1
Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (BMKX5S, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (BMKX5S, 0x000000400000 Bytes = 4.00 MB)

Flashing the dead body...OK
Resurrection complete!

now when connect show qualcomm hs-usb diagnostics 9006

any help

dave_21 · 05-12-2015, 22:34

use any tool as infinity bb5 ,atf or another for flash firmware:-)

ahwak · 05-13-2015, 15:58

i sucess

i repaire boot as V2 then repair as V1 it worked and imei is ok

thanks

Art-Service · 08-05-2015, 09:48

Quote:

Originally Posted by ahwak

i sucess

i repaire boot as V2 then repair as V1 it worked and imei is ok

thanks

I agree completely that works. try.

vivek_keviv123 · 08-25-2015, 22:38

me too thanks ahwak for sharing ur experience

Triminity · 11-21-2015, 13:50

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.56
Selected Package: [Nokia X RM-980 V2 V1.05 by <Babak Nuri>]

Connecting to the dead body...OK
Detected dead body ID: 0x007700E1
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x03010035

ERROR: Selected FLASH Chip was not initialized by the DCC Loader.ERROR

05-12-2015, 19:19	#1 (permalink)
ahwak No Life Poster Join Date: Sep 2007 Posts: 684 Member: 591084 Status: Offline Thanks Meter: 41	nokia x sucess repair but can't flash Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [Nokia X RM-980 V1.01 by <Babak Nuri>] Connecting to the dead body...OK Detected dead body ID: 0x007700E1 Set I/O Voltage reads as 2.61V, TCK Frequency is 1 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (BMKX5S, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (BMKX5S, 0x000000400000 Bytes = 4.00 MB) Flashing the dead body...OK Resurrection complete! now when connect show qualcomm hs-usb diagnostics 9006 any help

05-12-2015, 22:34	#2 (permalink)
dave_21 Freak Poster Join Date: Jul 2007 Location: italy Posts: 473 Member: 548901 Status: Offline Sonork: 100.1644756 Thanks Meter: 51	nokiax use any tool as infinity bb5 ,atf or another for flash firmware:-)

11-21-2015, 13:50	#6 (permalink)
Triminity Registered User Join Date: Jun 2005 Location: jamnagar gujarat india Posts: 904 Member: 149938 Status: Offline Thanks Meter: 47	nokia x problem. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.56 Selected Package: [Nokia X RM-980 V2 V1.05 by <Babak Nuri>] Connecting to the dead body...OK Detected dead body ID: 0x007700E1 Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK WARNING: DCC Loader was unable to initialize FLASH1 chip. Error code: 0x03010035 ERROR: Selected FLASH Chip was not initialized by the DCC Loader.ERROR

05-13-2015, 15:58	#3 (permalink)
ahwak No Life Poster Join Date: Sep 2007 Posts: 684 Member: 591084 Status: Offline Thanks Meter: 41	i sucess i repaire boot as V2 then repair as V1 it worked and imei is ok thanks

08-25-2015, 22:38	#5 (permalink)
vivek_keviv123 Junior Member Join Date: Jun 2009 Posts: 30 Member: 1055094 Status: Offline Thanks Meter: 10	me too thanks ahwak for sharing ur experience