OT-995 Ressurection - GSM-Forum

unlock.mk · 03-11-2013, 14:09

After succesuful ressurect with Riff Box , phone do not entering fastboot with Volume - , Power.
Or there is another thing i need to make to flash this phone ?
But when i press both volume buttons PC detected phone like Alcatel HSUSB QDloader 9008.
How to flash this phone ?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Alcatel OT995 V1.0.4787.9942]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000074C00000 Bytes = 1.82 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

unlock.mk · 03-11-2013, 14:52

This is how phone is recognised in device manager

**legija** · 03-11-2013, 15:13

Both volume + power would start phone in diag mode even if phone is 100% working.
It's generic qualcomm diag mode.

What happens when You simply connect phone to USB cable without pressing any buttons ?

unlock.mk · 03-11-2013, 15:19

Quote:

Originally Posted by legija

Both volume + power would start phone in diag mode even if phone is 100% working.
It's generic qualcomm diag mode.

What happens when You simply connect phone to USB cable without pressing any buttons ?

It is detected like Unrecognised device.

unlock.mk · 03-11-2013, 18:05

Quote:

Originally Posted by unlock.mk

It is detected like Unrecognised device.

USB Device not recognised. Is there a solution according to this ?

unlock.mk · 03-15-2013, 09:40

Quote:

Originally Posted by unlock.mk

USB Device not recognised. Is there a solution according to this ?

Any one has a solution or at least suggestion ?

raulka2003 · 04-01-2013, 10:28

same for me
USB Device not recognised. Is there a solution according to this ?

stefani · 04-10-2013, 13:16

same here....

ca't flash after resurect..

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Alcatel OT995 V1.0.4836.5344]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000074C00000 Bytes = 1.82 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

gerferomb · 04-10-2013, 18:44

same with my ot-995

after ressurected phone must be hung on logo..and did not detected....

on my device manager it show unknown device..

please fix this problem...

stefani · 04-11-2013, 07:36

..is a bug in software...resurection done - dead patient....

forhike · 04-11-2013, 12:17

Hi!

Have anyone got it working?

I have a dead phone, but dont want to spend time disamble phone and make jtag connection if it wont fix the phone =/

b.r

barkas000 · 04-13-2013, 09:19

guys wait a couple of days I will lay out full flash

Pufi164 · 04-13-2013, 15:54

Same problem:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Alcatel OT995 V1.0.4836.5344]

Connecting to the dead body...OK
Detected dead body ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M2G1HF, 0x000077400000 Bytes = 1.86 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M2G1HF, 0x000000100000 Bytes = 1.00 MB)

Flashing the dead body...OK
Resurrection complete!

"Both volume + power would start phone in diag mode even if phone is 100% working."

NOT WORK!

renat_d · 04-15-2013, 09:36

Quote:

Originally Posted by barkas000

guys wait a couple of days I will lay out full flash

Thanks barkas000

We waiting a worked FF /

In this time we have only half-dead FF ( your fullFlash ) :

boot995.rar ? Yandex.Disk , also thanks for you , barkas

barkas000 · 04-15-2013, 14:54

full flash 995-spa10
full flash995.rar ? Yandex.Disk

03-11-2013, 14:09	#1 (permalink)
unlock.mk No Life Poster Join Date: Oct 2011 Location: Macedonia Posts: 1,196 Member: 1671934 Status: Offline Thanks Meter: 247	OT-995 Ressurection After succesuful ressurect with Riff Box , phone do not entering fastboot with Volume - , Power. Or there is another thing i need to make to flash this phone ? But when i press both volume buttons PC detected phone like Alcatel HSUSB QDloader 9008. How to flash this phone ? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Alcatel OT995 V1.0.4787.9942] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is 12 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000074C00000 Bytes = 1.82 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete!

03-11-2013, 15:13	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	Both volume + power would start phone in diag mode even if phone is 100% working. It's generic qualcomm diag mode. What happens when You simply connect phone to USB cable without pressing any buttons ?

04-01-2013, 10:28	#7 (permalink)
raulka2003 No Life Poster Join Date: Apr 2007 Location: Inside Samsung Pocket Age: 40 Posts: 1,538 Member: 489331 Status: Offline Thanks Meter: 1,141	same for me USB Device not recognised. Is there a solution according to this ?

04-10-2013, 13:16	#8 (permalink)
stefani No Life Poster Join Date: Mar 2007 Location: Roumania Posts: 1,140 Member: 461923 Status: Offline Thanks Meter: 2,020	same here.... ca't flash after resurect.. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Alcatel OT995 V1.0.4836.5344] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000074C00000 Bytes = 1.82 GB) Detected an Initialized FLASH2 Chip, ID: 0x0045/0x0100 (SEM02G, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete!

04-10-2013, 18:44	#9 (permalink)
gerferomb Freak Poster Join Date: Aug 2008 Location: In and Out Posts: 417 Member: 840912 Status: Offline Sonork: 100.1596244 Thanks Meter: 89	same with my ot-995 after ressurected phone must be hung on logo..and did not detected.... on my device manager it show unknown device.. please fix this problem...

04-11-2013, 07:36	#10 (permalink)
stefani No Life Poster Join Date: Mar 2007 Location: Roumania Posts: 1,140 Member: 461923 Status: Offline Thanks Meter: 2,020	..is a bug in software...resurection done - dead patient....

04-11-2013, 12:17	#11 (permalink)
forhike No Life Poster Join Date: Aug 2002 Location: Up North Posts: 900 Member: 14934 Status: Offline Thanks Meter: 79	Hi! Have anyone got it working? I have a dead phone, but dont want to spend time disamble phone and make jtag connection if it wont fix the phone =/ b.r

04-13-2013, 09:19	#12 (permalink)
barkas000 Junior Member Join Date: Jan 2013 Location: Russia Posts: 6 Member: 1861966 Status: Offline Thanks Meter: 7	guys wait a couple of days I will lay out full flash

04-13-2013, 15:54	#13 (permalink)
Pufi164 No Life Poster Join Date: Oct 2004 Location: Budapest Age: 54 Posts: 1,937 Member: 87188 Status: Offline Thanks Meter: 227	Same problem: Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Alcatel OT995 V1.0.4836.5344] Connecting to the dead body...OK Detected dead body ID: 0x27B360E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (M2G1HF, 0x000077400000 Bytes = 1.86 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (M2G1HF, 0x000000100000 Bytes = 1.00 MB) Flashing the dead body...OK Resurrection complete! "Both volume + power would start phone in diag mode even if phone is 100% working." NOT WORK!

04-15-2013, 14:54	#15 (permalink)
barkas000 Junior Member Join Date: Jan 2013 Location: Russia Posts: 6 Member: 1861966 Status: Offline Thanks Meter: 7	full flash 995-spa10 full flash995.rar ? Yandex.Disk