P1000 galaxy tab full dump and resurrection all go fine but still stuck at logo - GSM-Forum

lasty · 12-23-2011, 13:48

Cutomer tried to put themes onand stuck at samsung logo.

It is p1000 says inside on the label too.
I did probably all the possible solution but still no luck.
First I tried to put the stock 2.2 firmware on it and then tried about 5 different firmwares with check repartition and without and all pit files and I think everything.
Opened it up and made resurrection by riff then tried to flash it again many way.
Then connect to riff again and made full dump flash.
Nothing helped.
And ofcourse I tried thicked everything at resurrection and whatever I can do.
I was wondering maybe the full flash is not good?
Thers is 2 files 1`s got 2 parts wich is not good file as size is not right second was fine in size but maybe not working file cos phone still wasn`t ok.
I downloaded them at riff.
Why there is no button for erase flash?
Now it says after make flash by stock firmware that boot record checksum error or failed.
Does anyone know how to fix this phone?
I had about 6 hours work with it.

abu osama · 12-23-2011, 20:07

u need reflash with dbdate.tar file after flash with orignal firmwer.

lasty · 12-23-2011, 21:36

I did that few times as well.
thnx

blaiseid · 12-23-2011, 22:01

Quote:

Originally Posted by lasty

Cutomer tried to put themes onand stuck at samsung logo.

It is p1000 says inside on the label too.
I did probably all the possible solution but still no luck.
First I tried to put the stock 2.2 firmware on it and then tried about 5 different firmwares with check repartition and without and all pit files and I think everything.
Opened it up and made resurrection by riff then tried to flash it again many way.
Then connect to riff again and made full dump flash.
Nothing helped.
And ofcourse I tried thicked everything at resurrection and whatever I can do.
I was wondering maybe the full flash is not good?
Thers is 2 files 1`s got 2 parts wich is not good file as size is not right second was fine in size but maybe not working file cos phone still wasn`t ok.
I downloaded them at riff.
Why there is no button for erase flash?
Now it says after make flash by stock firmware that boot record checksum error or failed.
Does anyone know how to fix this phone?
I had about 6 hours work with it.

[GUIDE]How To Unbrick Your Galaxy Tab! - xda-developers

lasty · 12-27-2011, 13:27

Cannot find heidmall firmware package for p1000.

At the moment it is doing this:
p1000_galaxy_tab_boot_error - MyPicx.com

BABAK NURI · 12-28-2011, 00:28

please see correct model from box package sticker....sure p1000 ,not p100n,etc

1-if you need ERASE,just untick "main" in read/write page.....,i think better not try for erase
2-maybe damaged eMMC....
3-try for put phone to recovery menu...if done,usually emmc is fine,and if not going to recovery menu....you can see many red line about your problem

4-flash with correct kernel(cf-root) and test again
5-try this firmware.......P1000JPJPC.....i don't have any problem by this firmware

lasty · 12-28-2011, 10:22

It is p1000 says on the back and on the label too inside the phone.
I tried many firmwares already but I`m gonna try p1000jpjpc too.
When I put it to recovery mode I can see nothing wrong many times for ex. when I put full dump.
All goes fine with some of the firmwares but it stucks at logo always.

Alfarouk · 02-07-2012, 16:42

Clients p1000 was not able to flash then I did the jig thing resurrect and now in download mode but nothing more tried to flashing different version but no work any help pliz.

here is the log.
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.30, JTAG Manager Version: 1.38
Selected Resurrector: [Samsung Galaxy Tab]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

pliz assist masters.

12-23-2011, 13:48	#1 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	P1000 galaxy tab full dump and resurrection all go fine but still stuck at logo Cutomer tried to put themes onand stuck at samsung logo. It is p1000 says inside on the label too. I did probably all the possible solution but still no luck. First I tried to put the stock 2.2 firmware on it and then tried about 5 different firmwares with check repartition and without and all pit files and I think everything. Opened it up and made resurrection by riff then tried to flash it again many way. Then connect to riff again and made full dump flash. Nothing helped. And ofcourse I tried thicked everything at resurrection and whatever I can do. I was wondering maybe the full flash is not good? Thers is 2 files 1`s got 2 parts wich is not good file as size is not right second was fine in size but maybe not working file cos phone still wasn`t ok. I downloaded them at riff. Why there is no button for erase flash? Now it says after make flash by stock firmware that boot record checksum error or failed. Does anyone know how to fix this phone? I had about 6 hours work with it.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
IR between 6150 and IBM TP 600	favdijck	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	11-15-2011 13:08
Eeprom dump lost, help needed.	CAMILO	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	11-29-2010 19:04
Operator-Logo for 5110	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	06-25-1999 15:50
wt603 and .pkd	ARt	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	06-13-1999 19:18

12-23-2011, 20:07	#2 (permalink)
abu osama Freak Poster Join Date: Jan 2005 Location: Look for me I'm not here ... n Age: 51 Posts: 331 Member: 103786 Status: Offline Thanks Meter: 81	u need reflash with dbdate.tar file after flash with orignal firmwer.

12-23-2011, 21:36	#3 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	I did that few times as well. thnx

12-27-2011, 13:27	#5 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	Cannot find heidmall firmware package for p1000. At the moment it is doing this: p1000_galaxy_tab_boot_error - MyPicx.com

12-28-2011, 00:28	#6 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	please see correct model from box package sticker....sure p1000 ,not p100n,etc 1-if you need ERASE,just untick "main" in read/write page.....,i think better not try for erase 2-maybe damaged eMMC.... 3-try for put phone to recovery menu...if done,usually emmc is fine,and if not going to recovery menu....you can see many red line about your problem 4-flash with correct kernel(cf-root) and test again 5-try this firmware.......P1000JPJPC.....i don't have any problem by this firmware

12-28-2011, 10:22	#7 (permalink)
lasty Freak Poster Join Date: Nov 2006 Location: UK Posts: 488 Member: 395587 Status: Offline Thanks Meter: 63	It is p1000 says on the back and on the label too inside the phone. I tried many firmwares already but I`m gonna try p1000jpjpc too. When I put it to recovery mode I can see nothing wrong many times for ex. when I put full dump. All goes fine with some of the firmwares but it stucks at logo always.

02-07-2012, 16:42	#8 (permalink)
Alfarouk Freak Poster Join Date: Jul 2006 Location: indian ocean Posts: 183 Member: 320858 Status: Offline Sonork: 100.1602961 Thanks Meter: 25	Clients p1000 was not able to flash then I did the jig thing resurrect and now in download mode but nothing more tried to flashing different version but no work any help pliz. here is the log. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.30, JTAG Manager Version: 1.38 Selected Resurrector: [Samsung Galaxy Tab] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete! pliz assist masters.