P1000 Uploading resurrector data into memory...FAILED - GSM-Forum

sancakaziz · 05-20-2012, 16:54

Connect &get ID ok.

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung Galaxy Tab V1.00]

Connecting to the dead body...OK
Set I/O Voltage reads as 2.78V, TCK Frequency is 2 MHz

Detected dead body ID: 0x1BA00477

Analyze jtag chain

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung Galaxy Tab V1.00]

Connecting to the target...OK
Set I/O Voltage reads as 2.80V, TCK Frequency is 2 MHz

Following devices are found on the JTAG chain:
Device on TAP #0: ID = 0x1BA00477, IR Length = 0x04 bits
Total IR length: 0x0004 bits

Reset target:

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung Galaxy Tab V1.00]

Resetting target...OK
STATUS: Target is halted.

R0 = 0xD0037D20 R6 = 0xD0037580 R12 = 0xE0E00018
R1 = 0xD0037CC4 R7 = 0x00000000 R13 = 0xD0037BD8
R2 = 0x00000027 R8 = 0x00000040 R14 = 0x0000AB14
R3 = 0x00000000 R9 = 0x00000000 R15 = 0x0000B198
R4 = 0x00000000 R10 = 0x00000000 CPSR = 0x20000153
R5 = 0x00000000 R11 = 0x00000000

Rwesurrection error:

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung Galaxy Tab V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.78V, TCK Frequency is 2 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...FAILED
ERROR: RAM memory selftest failed.

BABAK NURI · 05-20-2012, 23:15

Hi

Check connection...exact NRST
Set low speed TCK/RTCK 6mhz is good idea
Use USB Cable or Hold Power on key during resurrect

Please Read:
RIFF JTAG Box FAQ - ERROR: RAM memory selftest failed.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
The Best Dual Data cable FBUS-M2BUS for your NOKIA 5110 6110	nk.cable	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-14-1999 15:33
Operator logo uploader	Nesa	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	08-17-1999 08:38
Upload / Download eeprom program for 51xx/61xx	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-07-1999 14:03
Upload & Download Eprom	Lousangeles	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	06-24-1999 05:45

05-20-2012, 23:15	#2 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	Hi Check connection...exact NRST Set low speed TCK/RTCK 6mhz is good idea Use USB Cable or Hold Power on key during resurrect Please Read: RIFF JTAG Box FAQ - ERROR: RAM memory selftest failed.