PANTECH IM-A860s Sky Mobile - GSM-Forum

11-26-2013, 11:56

This stuck always here:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Pantech A860S V1.0.4968.20363]

Connecting to the dead body...OK
Detected dead body ID: 0x107180E1 - IGNORED!
Set I/O Voltage reads as 1.78V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...

Note:- On A850L and A870L Resurrection 100% OK
Its Boot DCC Loader File Error!
Anyone Tested...???

**legija** · 11-26-2013, 12:07

This appears to be bug in DLL resources.
It's noted and will be fixed in due time.

Contact me via ICQ to repair this phone via remote helper.

11-26-2013, 13:26

OK i come to ICQ in a short while
Thanks for Your Support!

11-26-2013, 13:48

yes Done! :-)

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Pantech A860S V1.0.4968.20363]

Connecting to the dead body...OK
Detected dead body ID: 0x107180E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x20010000000000000000000004000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000747C00000 Bytes = 29.12 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000000200000 Bytes = 2.00 MB)

Writting FLASH1 memory from 0x00000C000000 to 0x00000C17FFFF
Completed in 00:00:06.860 (Average Transfer Rate: 223.91 kB/s)

Writting FLASH1 memory from 0x00000C180000 to 0x00000C2FFFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Completed in 00:00:08.265 (Average Transfer Rate: 185.84 kB/s)

Writting FLASH1 memory from 0x00000C300000 to 0x00000C47FFFF
Completed in 00:00:08.328 (Average Transfer Rate: 184.44 kB/s)

Writting FLASH1 memory from 0x00000C480000 to 0x00000D87FFFF
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
Completed in 00:01:47.047 (Average Transfer Rate: 191.32 kB/s)

Writting FLASH1 memory from 0x00000D880000 to 0x00000D9FFFFF
Completed in 00:00:07.250 (Average Transfer Rate: 211.86 kB/s)

Writting FLASH1 memory from 0x000014000000 to 0x00001417FFFF
Completed in 00:00:07.469 (Average Transfer Rate: 205.65 kB/s)

Writting FLASH1 memory from 0x000014180000 to 0x0000141FFFFF
Completed in 00:00:02.203 (Average Transfer Rate: 232.41 kB/s)

Writting FLASH1 memory from 0x000014800000 to 0x000014BFFFFF
Completed in 00:00:17.250 (Average Transfer Rate: 237.45 kB/s)

Phone is on StartUp Logo Blink and Bootloader Alive Now!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-26-2013, 12:07	#2 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	This appears to be bug in DLL resources. It's noted and will be fixed in due time. Contact me via ICQ to repair this phone via remote helper.

11-26-2013, 13:26	#3 (permalink)
moonmoon8 Guest Posts: n/a Member:	OK i come to ICQ in a short while Thanks for Your Support!

11-26-2013, 13:48	#4 (permalink)
moonmoon8 Guest Posts: n/a Member:	yes Done! :-) Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Pantech A860S V1.0.4968.20363] Connecting to the dead body...OK Detected dead body ID: 0x107180E1 - CORRECT! Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x20010000000000000000000004000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000747C00000 Bytes = 29.12 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (MBG4GA, 0x000000200000 Bytes = 2.00 MB) Writting FLASH1 memory from 0x00000C000000 to 0x00000C17FFFF Completed in 00:00:06.860 (Average Transfer Rate: 223.91 kB/s) Writting FLASH1 memory from 0x00000C180000 to 0x00000C2FFFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Completed in 00:00:08.265 (Average Transfer Rate: 185.84 kB/s) Writting FLASH1 memory from 0x00000C300000 to 0x00000C47FFFF Completed in 00:00:08.328 (Average Transfer Rate: 184.44 kB/s) Writting FLASH1 memory from 0x00000C480000 to 0x00000D87FFFF ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK Completed in 00:01:47.047 (Average Transfer Rate: 191.32 kB/s) Writting FLASH1 memory from 0x00000D880000 to 0x00000D9FFFFF Completed in 00:00:07.250 (Average Transfer Rate: 211.86 kB/s) Writting FLASH1 memory from 0x000014000000 to 0x00001417FFFF Completed in 00:00:07.469 (Average Transfer Rate: 205.65 kB/s) Writting FLASH1 memory from 0x000014180000 to 0x0000141FFFFF Completed in 00:00:02.203 (Average Transfer Rate: 232.41 kB/s) Writting FLASH1 memory from 0x000014800000 to 0x000014BFFFFF Completed in 00:00:17.250 (Average Transfer Rate: 237.45 kB/s) Phone is on StartUp Logo Blink and Bootloader Alive Now!