please help s6500d after repair still restart - GSM-Forum

aboughada · 12-06-2013, 14:32

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S6500D V1.0.0.0]

Connecting to the dead body...OK
Detected dead body ID: 0x106040E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (S5U00M, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (S5U00M, 0x000000200000 Bytes = 2.00 MB)

Flashing the dead body...OK
Resurrection complete!

and can't enter download mode

maksoodn · 12-06-2013, 14:42

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 180m(system),240m(userdata),30m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock)
Analysis flash internal data successfully.

zears a1 file plz
after format show on logo
please Umesh Gaba Br

aboughada · 12-06-2013, 15:31

Quote:

Originally Posted by maksoodn

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 180m(system),240m(userdata),30m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock)
Analysis flash internal data successfully.

zears a1 file plz
after format show on logo
please Umesh Gaba Br

post your result here

http://forum.gsmhosting.com/vbb/f723/

TphoneGsM · 12-06-2013, 15:53

1. Erase
2. Dump flash
3. Resurractor
4. Odin full flash
5. Recovery full wipe
6. Done.

gepenx_fausta · 12-07-2013, 06:10

after ressurector , just flash via odine with multiple file package, or write full dump

aboughada · 12-07-2013, 09:03

Quote:

Originally Posted by TphoneGsM

1. Erase
2. Dump flash
3. Resurractor
4. Odin full flash
5. Recovery full wipe
6. Done.

Quote:

Originally Posted by gepenx_fausta

after ressurector , just flash via odine with multiple file package, or write full dump

can't enter download mode

12-06-2013, 14:32	#1 (permalink)
aboughada Insane Poster Join Date: Apr 2013 Posts: 83 Member: 1927455 Status: Offline Sonork: 1650262 Thanks Meter: 8	please help s6500d after repair still restart Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.37, JTAG Manager Version: 1.55 Selected Resurrector: [Samsung S6500D V1.0.0.0] Connecting to the dead body...OK Detected dead body ID: 0x106040E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (S5U00M, 0x0000E9000000 Bytes = 3.64 GB) Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (S5U00M, 0x000000200000 Bytes = 2.00 MB) Flashing the dead body...OK Resurrection complete! and can't enter download mode

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-06-2013, 14:42	#2 (permalink)
maksoodn Junior Member Join Date: Jan 2007 Location: pure indian Posts: 11 Member: 436212 Status: Offline Thanks Meter: 3	Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 002C00BC90555600 Flash Type:[Micron] MT29C4G48MAZAPAKD FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 180m(system),240m(userdata),30m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock) Analysis flash internal data successfully. zears a1 file plz after format show on logo please Umesh Gaba Br

12-06-2013, 15:53	#4 (permalink)
TphoneGsM Junior Member Join Date: Dec 2013 Location: Turkey-Gallipoli Age: 44 Posts: 19 Member: 2078367 Status: Offline Thanks Meter: 0	1. Erase 2. Dump flash 3. Resurractor 4. Odin full flash 5. Recovery full wipe 6. Done.

12-07-2013, 06:10	#5 (permalink)
gepenx_fausta Freak Poster Join Date: Aug 2007 Location: Inside GSM Posts: 161 Member: 557999 Status: Offline Thanks Meter: 7	after ressurector , just flash via odine with multiple file package, or write full dump