Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 51 - GSM-Forum

qwerthj · 08-26-2011, 17:14

Working phone, only repair imei, didn't need flash or any other operation, just changed

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Desire HD]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 10 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00BD/0x00C8 (0x008B000000 Bytes)

Flashing the dead body...OK
Resurrection complete!

GSM_MARSHALS · 08-27-2011, 01:01

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Desire HD]

Connecting to the dead body...OK
Detected dead body ID: 0x17B360E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00BD/0x0081 (0x008B000000 Bytes)

Unlocking the Phone...OK
Unlock complete!

turca · 08-27-2011, 17:08

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Mega]
Connecting to the dead body...OK
Detected dead body ID: 0xC01B00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

mobilcenter · 08-27-2011, 22:01

htc snap,, full unlock

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.29
Selected Resurrector: [HTC Snap]

Connecting to the dead body...OK
Detected dead body ID: 0xC01B00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...OK
Resurrection complete!

abuqatadh · 08-28-2011, 09:35

Repaired samsung u700 by riff jtag

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung U700]

Connecting to the dead body...OK
Detected dead body ID: 0x100D00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0098/0x0079 (128MB)
Flashing the dead body...OK
Resurrection complete!

VINOD399 · 08-31-2011, 14:38

zte s100 blinking recover
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [ZTE S100]

Connecting to the dead body...OK
Detected dead body ID: 0x200B10E1 - IGNORED!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB)
Flashing the dead body...OK
Resurrection complete!

ezysuresh · 08-31-2011, 15:04

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Chief]

Connecting to the dead body...OK
Detected dead body ID: 0xC01E00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BA (256MB)
Selected Unlocking Data for the NAND Chip with Page size = 2KB

Unlocking the Phone...OK
Unlock code is: 71573626
Unlock complete!

M0YAL · 09-02-2011, 09:00

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [QSC1100 X14]

Connecting to the dead body...OK
Detected dead body ID: 0x122CE0E1 - CORRECT!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010000800000000000000034

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB)

Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF
Completed in 00:05:28.469 (Average Transfer Rate: 49.88 kB/s)

Akili Bulent · 09-02-2011, 12:07

Repair ok S5570

START OPERATION_ID = RESURRECT
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung S5570]

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!
FINISH OPERATION_ID = RESURRECT

mobilegsm30 · 09-03-2011, 09:04

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung S8500]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.78V, TCK Frequency is 8 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

Shoxa · 09-03-2011, 14:02

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.16, JTAG Manager Version: 1.22
Selected Resurrector: [Samsung S5230]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.02V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x00BA (256MB)
Flashing the dead body...OK
Resurrection complete!

Code:

Open serial port...OK
 Connecting to the RIFF Box...OK
 Firmware Version: 1.22, JTAG Manager Version: 1.29
 Selected Resurrector: [LG P500]

 Connecting to the dead body...OK
 Detected dead body ID: 0x203C00E1 - CORRECT!
 Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
 Adaptive Clocking RTCK Sampling is: [Sample at MAX]

 Resurrection sequence started.
 Establish communication with the phone...OK
 Initializing internal hardware configuration...OK
 Uploading resurrector data into memory...OK
 Starting communication with resurrector...OK

 Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
 Flashing the dead body...OK
 Resurrection complete!

Code:

Open serial port...OK
 Connecting to the RIFF Box...OK
 Firmware Version: 1.19, JTAG Manager Version: 1.29
 Selected Resurrector: [USB Modem MF626]

 Connecting to the dead body...OK
 Detected dead body ID: 0x201200E1 - CORRECT!
 Set I/O Voltage reads as 3.27V, TCK Frequency is RTCK
 Adaptive Clocking RTCK Sampling is: [Sample at 10 MHz]

 Resurrection sequence started.
 Establish communication with the phone...OK
 Uploading resurrector data into memory...OK
 Starting communication with resurrector...OK

 Detected an Initialized FLASH1 Chip ID: 0x00AD/0x0036 (64MB)
 Flashing the dead body...OK
 Resurrection complete!

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.18, JTAG Manager Version: 1.26
Selected Resurrector: [USB Modem MF180]

Connecting to the dead body...OK
Detected dead body ID: 0x401200E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 1 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x0036 (64MB)
Detected: 64MB Modem Revision.
Flashing the dead body...OK
Resurrection complete!

flash full

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC Rhodium]

Connecting to the dead body...OK
Detected dead body ID: 0x301700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x0000010020000000000000000025

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)

Writting FLASH1 memory from 0x0000000000 to 0x001FFFFFFF
Completed in 00:51:51.219 (Average Transfer Rate: 173.78 kB/s)

nyakam · 09-03-2011, 17:14

HTC HD2 LEO _tmobile

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [HTC HD2 (Leo)]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 800 kHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55B3 (1024MB)
Unlocking the Phone...OK
Unlock complete!

Akili Bulent · 09-04-2011, 11:41

Another S5570 successfully repaired

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Samsung S5570]

Connecting to the dead body...OK
Detected dead body ID: 0x203C10E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

mayank.gupta · 09-04-2011, 17:20

huawei c2823 recover done

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.26, JTAG Manager Version: 1.35
Selected Resurrector: [Huawei C2901M]

Connecting to the dead body...OK
Detected dead body ID: 0x220B10E1 - IGNORED!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
Settings Code: 0x0C00010000800000000000000024

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8848 (8MB)

Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF
Completed in 00:03:25.469 (Average Transfer Rate: 39.87 kB/s)

ranagaurav · 09-05-2011, 03:52

huwai EC150 READ SUCSESS

Quote:

[9/5/2011 8:10:37 AM] Open serial port...OK
[9/5/2011 8:10:37 AM] Connecting to the RIFF Box...OK
[9/5/2011 8:10:37 AM] Firmware Version: 1.26, JTAG Manager Version: 1.35
[9/5/2011 8:10:37 AM] Selected Resurrector: [QSC6XXX L36 D08]
[9/5/2011 8:10:37 AM]
[9/5/2011 8:10:37 AM] Connecting to the dead body...OK
[9/5/2011 8:10:37 AM] Detected dead body ID: 0x100F80E1 - CORRECT!
[9/5/2011 8:10:37 AM] Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
[9/5/2011 8:10:37 AM] Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
[9/5/2011 8:10:37 AM] Settings Code: 0x0C00010008000000000000000027
[9/5/2011 8:10:37 AM]
[9/5/2011 8:10:37 AM] Resurrection sequence started.
[9/5/2011 8:10:37 AM] Establish communication with the phone...OK
[9/5/2011 8:10:37 AM] Initializing internal hardware configuration...OK
[9/5/2011 8:10:37 AM] Uploading resurrector data into memory...OK
[9/5/2011 8:10:37 AM] Starting communication with resurrector...OK
[9/5/2011 8:10:37 AM]
[9/5/2011 8:10:37 AM] Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x15A1 (128MB)
[9/5/2011 8:10:37 AM]
[9/5/2011 8:10:37 AM] Reading FLASH1 address space from 0x0000000000 to 0x0007FFFFFF
[9/5/2011 8:10:37 AM] Completed in 00:03:57.016 (Average Transfer Rate: 570.29 kB/s)
[9/5/2011 8:10:37 AM] [FINISH OPERATION_ID = DCC_READ_MEMORY]

08-26-2011, 17:14	#751 (permalink)
qwerthj No Life Poster Join Date: Feb 2003 Location: Hungary Age: 42 Posts: 858 Member: 22902 Status: Offline Sonork: 100.64924 Thanks Meter: 88	Desire HD IMEI repair OK! Working phone, only repair imei, didn't need flash or any other operation, just changed Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC Desire HD] Connecting to the dead body...OK Detected dead body ID: 0x17B360E1 - CORRECT! Set I/O Voltage reads as 1.79V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 10 MHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00BD/0x00C8 (0x008B000000 Bytes) Flashing the dead body...OK Resurrection complete!

08-27-2011, 01:01	#752 (permalink)
GSM_MARSHALS No Life Poster Join Date: Sep 2004 Location: SKYPE: will.catcher Age: 39 Posts: 500 Member: 81832 Status: Offline Thanks Meter: 53	Guess what ,It's an HD Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC Desire HD] Connecting to the dead body...OK Detected dead body ID: 0x17B360E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00BD/0x0081 (0x008B000000 Bytes) Unlocking the Phone...OK Unlock complete!

08-31-2011, 15:04	#757 (permalink)
ezysuresh Freak Poster Join Date: Jan 2006 Location: SURESH ELECTRONICS, INDIA Age: 49 Posts: 390 Member: 216081 Status: Offline Sonork: 100.1614205 Thanks Meter: 55	HTC verizon xv6175 unlock done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC Chief] Connecting to the dead body...OK Detected dead body ID: 0xC01E00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55BA (256MB) Selected Unlocking Data for the NAND Chip with Page size = 2KB Unlocking the Phone...OK Unlock code is: 71573626 Unlock complete!

09-02-2011, 09:00	#758 (permalink)
M0YAL No Life Poster Join Date: May 2011 Location: india Posts: 1,679 Member: 1583254 Status: Offline Sonork: 100.1602320 Thanks Meter: 4,792	ZTE 1602 Recover Again Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [QSC1100 X14] Connecting to the dead body...OK Detected dead body ID: 0x122CE0E1 - CORRECT! Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x0000010000800000000000000034 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x882E (16MB) Writting FLASH1 memory from 0x0000000000 to 0x0000FFFFFF Completed in 00:05:28.469 (Average Transfer Rate: 49.88 kB/s)

09-03-2011, 09:04	#760 (permalink)
mobilegsm30 No Life Poster Join Date: Mar 2005 Age: 44 Posts: 865 Member: 129486 Status: Offline Thanks Meter: 66	S8500 repair ok Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung S8500] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.78V, TCK Frequency is 8 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

08-27-2011, 17:08	#753 (permalink)
turca No Life Poster Join Date: Dec 2005 Location: mt brazil Posts: 3,381 Member: 211017 Status: Offline Thanks Meter: 312	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC Mega] Connecting to the dead body...OK Detected dead body ID: 0xC01B00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) Flashing the dead body...OK Resurrection complete!

08-27-2011, 22:01	#754 (permalink)
mobilcenter Junior Member Join Date: Oct 2007 Posts: 7 Member: 607612 Status: Offline Thanks Meter: 4	htc snap,, full unlock Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.29 Selected Resurrector: [HTC Snap] Connecting to the dead body...OK Detected dead body ID: 0xC01B00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB) Flashing the dead body...OK Resurrection complete!

08-31-2011, 14:38	#756 (permalink)
VINOD399 No Life Poster Join Date: Jan 2009 Location: aurangabad Posts: 997 Member: 937338 Status: Offline Sonork: 100.1651155 Thanks Meter: 114	zte s100 blinking recover Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [ZTE S100] Connecting to the dead body...OK Detected dead body ID: 0x200B10E1 - IGNORED! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x257E (8MB) Flashing the dead body...OK Resurrection complete!

09-02-2011, 12:07	#759 (permalink)
Akili Bulent Freak Poster Join Date: Feb 2005 Location: Paris Age: 47 Posts: 239 Member: 113924 Status: Offline Thanks Meter: 29	Repair ok S5570 START OPERATION_ID = RESURRECT Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung S5570] Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete! FINISH OPERATION_ID = RESURRECT

09-03-2011, 17:14	#762 (permalink)
nyakam No Life Poster Join Date: Apr 2006 Location: cameroon Posts: 878 Member: 260658 Status: Offline Thanks Meter: 184	HTC HD2 LEO _tmobile Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [HTC HD2 (Leo)] Connecting to the dead body...OK Detected dead body ID: 0x202400E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 800 kHz] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55B3 (1024MB) Unlocking the Phone...OK Unlock complete!

09-04-2011, 11:41	#763 (permalink)
Akili Bulent Freak Poster Join Date: Feb 2005 Location: Paris Age: 47 Posts: 239 Member: 113924 Status: Offline Thanks Meter: 29	Another S5570 successfully repaired Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Samsung S5570] Connecting to the dead body...OK Detected dead body ID: 0x203C10E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

09-04-2011, 17:20	#764 (permalink)
mayank.gupta No Life Poster Join Date: Feb 2009 Posts: 845 Member: 966792 Status: Offline Sonork: 100.1602610 Thanks Meter: 199	huawei c2823 recover done Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.26, JTAG Manager Version: 1.35 Selected Resurrector: [Huawei C2901M] Connecting to the dead body...OK Detected dead body ID: 0x220B10E1 - IGNORED! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz] Settings Code: 0x0C00010000800000000000000024 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x8848 (8MB) Writting FLASH1 memory from 0x0000000000 to 0x00007FFFFF Completed in 00:03:25.469 (Average Transfer Rate: 39.87 kB/s)