Post here success logs with RIFF JTAG Manager 1.64 and fw 1.41 - Page 6 - GSM-Forum

fflyx · 09-20-2010, 14:20

Flash:

Code:

Open serial port...OK
  Connecting to the RIFF Box...OK
  Firmware Version: 1.13, JTAG Manager Version: 1.14
  Selected Resurrector: [HTC Rhodium W]
   
  Connecting to the dead body...OK
  Detected dead body ID: 0x301000E1 - CORRECT!
  Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
  Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
   
  Resurrection sequence started.
  Establish communication with the phone...OK
  Initializing internal hardware configuration...OK
  Uploading resurrector data into memory...OK
  Starting communication with resurrector...OK
   
  Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
   
  Writting NAND memory from 0x00000000 to 0x1FFFFFFF
  Completed in 01:24:01.218 (Average Transfer Rate: 107.25 kB/s)

Resurrection:

Code:

Open serial port...OK
  Connecting to the RIFF Box...OK
  Firmware Version: 1.13, JTAG Manager Version: 1.14
  Selected Resurrector: [HTC Rhodium W]
   
  Connecting to the dead body...OK
  Detected dead body ID: 0x301000E1 - CORRECT!
  Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
  Adaptive Clocking RTCK Sampling is: [Sample at 4 MHz]
   
  Resurrection sequence started.
  Establish communication with the phone...OK
  Initializing internal hardware configuration...OK
  Uploading resurrector data into memory...OK
  Starting communication with resurrector...OK
   
  Detected an Initialized FLASH1 Chip ID: 0x00EC/0x55BC (512MB)
  Flashing the dead body...OK
  Resurrection complete!

deepakgarg · 09-22-2010, 09:10

phone unlocked and activation screen also skipped

sirnavid2010 · 09-24-2010, 14:33

S5230G BOOT REPAIR OK WITH RIFF BOX
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung S5230]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x002C/0x00BA (256MB)
Flashing the dead body...OK
Resurrection complete!

DUSKnenixs · 09-24-2010, 15:29

modem huawei e220 boot dead

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [USB Modem E220]

Connecting to the dead body...OK
Detected dead body ID: 0x200C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB)
Flashing the dead body...OK
Resurrection complete!

DUSKnenixs · 09-24-2010, 15:39

full repair.....

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [USB Modem E220]

Connecting to the dead body...OK
Detected dead body ID: 0x200C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB)
Flashing the dead body...OK
Resurrection complete!

barac_m · 09-25-2010, 00:29

barac_m · 09-25-2010, 00:30

barac_m · 09-25-2010, 00:31

barac_m · 09-25-2010, 01:01

fflyx · 09-25-2010, 23:44

HTC Magic number 1:

Erase flash:

Code:

Open serial port...OK
  Connecting to the RIFF Box...OK
  Firmware Version: 1.13, JTAG Manager Version: 1.14
  Selected Resurrector: [HTC Magic 32A]
   
  Connecting to the dead body...OK
  Detected dead body ID: 0x301700E1 - CORRECT!
  Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
  Adaptive Clocking RTCK Sampling is: [Sample at MAX]
   
  Resurrection sequence started.
  Establish communication with the phone...OK
  Initializing internal hardware configuration...OK
  Uploading resurrector data into memory...OK
  Starting communication with resurrector...OK
   
  Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
   
  Erasing FLASH memory...OK
  Completed in 00:00:18.297 (Average Transfer Rate: 28654.31 kB/s)

Resurrect:

Code:

Open serial port...OK
  Connecting to the RIFF Box...OK
  Firmware Version: 1.13, JTAG Manager Version: 1.14
  Selected Resurrector: [HTC Magic 32A]
   
  Connecting to the dead body...OK
  Detected dead body ID: 0x301700E1 - CORRECT!
  Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
  Adaptive Clocking RTCK Sampling is: [Sample at MAX]
   
  Resurrection sequence started.
  Establish communication with the phone...OK
  Initializing internal hardware configuration...OK
  Uploading resurrector data into memory...OK
  Starting communication with resurrector...OK
   
  Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
  Flashing the dead body...OK
  Resurrection complete!

HTC Magic number 2:

Erase flash:

Code:

 Open serial port...OK
   Connecting to the RIFF Box...OK
   Firmware Version: 1.13, JTAG Manager Version: 1.14
   Selected Resurrector: [HTC Magic 32A]
    
   Connecting to the dead body...OK
   Detected dead body ID: 0x301700E1 - CORRECT!
   Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
   Adaptive Clocking RTCK Sampling is: [Sample at MAX]
    
   Resurrection sequence started.
   Establish communication with the phone...OK
   Initializing internal hardware configuration...OK
   Uploading resurrector data into memory...OK
   Starting communication with resurrector...OK
    
   Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
    
   Erasing FLASH memory...OK
   Completed in 00:00:18.297 (Average Transfer Rate: 28654.31 kB/s)

Resurrect:

Code:

 Open serial port...OK
   Connecting to the RIFF Box...OK
   Firmware Version: 1.13, JTAG Manager Version: 1.14
   Selected Resurrector: [HTC Magic 32A]
    
   Connecting to the dead body...OK
   Detected dead body ID: 0x301700E1 - CORRECT!
   Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
   Adaptive Clocking RTCK Sampling is: [Sample at MAX]
    
   Resurrection sequence started.
   Establish communication with the phone...OK
   Initializing internal hardware configuration...OK
   Uploading resurrector data into memory...OK
   Starting communication with resurrector...OK
    
   Detected an Initialized FLASH1 Chip ID: 0x002C/0x55BC (512MB)
   Flashing the dead body...OK
   Resurrection complete!

galijus · 09-26-2010, 12:09

very nice,thanks

Boshko_Alfa · 09-28-2010, 19:16

I9000 Samsung sucesfull boot repair after bad flash!

also repaired download mode problem from this samsung

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [Samsung I9000]

Connecting to the dead body...OK
Detected dead body ID: 0x1BA00477 - CORRECT!
Set I/O Voltage reads as 2.81V, TCK Frequency is 4 MHz

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB)
Flashing the dead body...OK
Resurrection complete!

DUSKnenixs · 09-29-2010, 23:04

100% working with dead boot

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [HTC Diamond]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB)
Flashing the dead body...OK
Resurrection complete!

Gsm_Fone · 09-30-2010, 14:17

HTC Desire resurrected succesfully..........!

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [HTC Desire]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BC (512MB)
Flashing the dead body...OK
Resurrection complete!

Regards.
Gsm_Fone....!

BesTCooL · 10-01-2010, 10:45

HTC G1 Sap100 complete

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.13, JTAG Manager Version: 1.14
Selected Resurrector: [HTC Dream (G1)]

Connecting to the dead body...OK
Detected dead body ID: 0xA01700E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BA (256MB)
Flashing the dead body...OK
Resurrection complete!

09-22-2010, 09:10	#77 (permalink)
deepakgarg No Life Poster Join Date: Jan 2006 Location: Chandigarh,India Age: 40 Posts: 5,790 Member: 220603 Status: Offline Thanks Meter: 1,164	tmobile google g1 unlocked phone unlocked and activation screen also skipped

09-25-2010, 00:29	#81 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	HTC Magic

09-25-2010, 00:30	#82 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	HTC Desire (unlock)

09-25-2010, 00:31	#83 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	Samsung S7070

09-25-2010, 01:01	#84 (permalink)
barac_m Insane Poster Join Date: Apr 2007 Location: mother Serbia Age: 38 Posts: 62 Member: 488048 Status: Offline Thanks Meter: 57	Samsung U700

09-24-2010, 14:33	#78 (permalink)
sirnavid2010 No Life Poster Join Date: May 2008 Location: persian Age: 43 Posts: 3,820 Member: 777729 Status: Offline Sonork: 100.1616470 Thanks Meter: 824	S5230G BOOT REPAIR OK WITH RIFF BOX Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung S5230] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 2.99V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x002C/0x00BA (256MB) Flashing the dead body...OK Resurrection complete!

09-24-2010, 15:29	#79 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	modem huawei e220 boot dead Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [USB Modem E220] Connecting to the dead body...OK Detected dead body ID: 0x200C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB) Flashing the dead body...OK Resurrection complete!

09-24-2010, 15:39	#80 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	full repair..... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [USB Modem E220] Connecting to the dead body...OK Detected dead body ID: 0x200C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0076 (64MB) Flashing the dead body...OK Resurrection complete!

09-26-2010, 12:09	#86 (permalink)
galijus No Life Poster Join Date: Oct 2009 Location: serbia Age: 44 Posts: 971 Member: 1131244 Status: Offline Sonork: 100.1596724 Thanks Meter: 376	desire unlock ok very nice,thanks

09-28-2010, 19:16	#87 (permalink)
Boshko_Alfa No Life Poster Join Date: Mar 2007 Location: Skopje, Macedonia Age: 36 Posts: 4,244 Member: 472933 Status: Offline Sonork: 100.1590967 Thanks Meter: 1,331	I9000 Samsung sucesfull boot repair after bad flash! also repaired download mode problem from this samsung Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [Samsung I9000] Connecting to the dead body...OK Detected dead body ID: 0x1BA00477 - CORRECT! Set I/O Voltage reads as 2.81V, TCK Frequency is 4 MHz Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x0050 (512MB) Flashing the dead body...OK Resurrection complete!

09-29-2010, 23:04	#88 (permalink)
DUSKnenixs No Life Poster Join Date: Jul 2001 Location: Planet earth Posts: 2,641 Member: 5169 Status: Offline Thanks Meter: 684	htc diam100 100% working with dead boot Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [HTC Diamond] Connecting to the dead body...OK Detected dead body ID: 0xA01700E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00EC/0x15AA (256MB) Flashing the dead body...OK Resurrection complete!

10-01-2010, 10:45	#90 (permalink)
BesTCooL No Life Poster Join Date: Dec 2002 Location: TURKEY Age: 44 Posts: 3,285 Member: 18442 Status: Offline Sonork: 111110 Thanks Meter: 622	HTC G1 Sap100 complete Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.13, JTAG Manager Version: 1.14 Selected Resurrector: [HTC Dream (G1)] Connecting to the dead body...OK Detected dead body ID: 0xA01700E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip ID: 0x00AD/0x55BA (256MB) Flashing the dead body...OK Resurrection complete!