Problem with dead I8700 - GSM-Forum

IvailoShopov · 06-26-2012, 09:14

Phone connected OK, but here is the error:

Code:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.32, JTAG Manager Version: 1.43
Selected Resurrector: [Samsung I8700 V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x202400E1 - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at 12 MHz]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x002C/0x55B3 (1024MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...FAILED
ERROR: Failed due to multiple communication errors. Terminating at 0x000000230000

Thanks in advance !

IvailoShopov · 07-06-2012, 09:29

Nobody have had this problem ?

**legija** · 07-06-2012, 11:10

RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
NHE_8 wont work with NHEK5689.dll v3	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	07-23-1999 15:48
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44
Netmonitor with FBus????	ratzfatz	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	06-09-1999 17:04

07-06-2012, 09:29	#2 (permalink)
IvailoShopov Freak Poster Join Date: Aug 2003 Location: Bulgaria Age: 36 Posts: 254 Member: 37668 Status: Offline Thanks Meter: 15	Nobody have had this problem ?

07-06-2012, 11:10	#3 (permalink)
legija Product Manager Join Date: Apr 2006 Age: 55 Posts: 5,746 Member: 256342 Status: Offline Sonork: None Thanks Meter: 28,276	RIFF JTAG Box FAQ - ERROR: Failed due to multiple communication errors.