problem erase and repair boot S5560i - GSM-Forum

meysam.karaji · 12-10-2012, 13:32

please help me.

:confus ed:

full erase.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung S5560i V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Settings Code: 0x01010000000000000000000010000000

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB)

Erasing FLASH1 memory from 0x000000000000 to 0x00000FFFFFFF...OK
WARNING: Erasing Error (0x24) at 0x000000080000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x0000000E0000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x000007380000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000AD60000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000C320000 is Ignored. Erase continues.
WARNING: Erasing Error (0x24) at 0x00000D6E0000 is Ignored. Erase continues.
Completed in 00:00:07.860 (Average Transfer Rate: 33351.65 kB/s)

repair boot.

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung S5560i V1.00]

Connecting to the dead body...OK
Detected dead body ID: 0x07926F0F - CORRECT!
Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Flashing the dead body...OK
WARNING: Programming Error (0x24) at 0x000000080000 is handled as Cut Excess.
WARNING: Programming Error (0x24) at 0x0000000E0000 is handled as Cut Excess.
Resurrection complete!

algerienbox · 12-10-2012, 14:17

Code:

WARNING: Erasing Error (0x24) at 0x00000D6E0000 is Ignored. Erase continues.

RIFF JTAG Box FAQ - Error code 0x24

meysam.karaji · 12-10-2012, 14:45

Was tested
But it did not solve the problem.

12-10-2012, 13:32	#1 (permalink)
meysam.karaji Registered User Join Date: Jul 2011 Location: IRAN-karaj Posts: 107 Member: 1613571 Status: Offline Sonork: 100.1615053 Thanks Meter: 57	problem erase and repair boot S5560i please help me.:confus ed: full erase. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung S5560i V1.00] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Settings Code: 0x01010000000000000000000010000000 Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB) Erasing FLASH1 memory from 0x000000000000 to 0x00000FFFFFFF...OK WARNING: Erasing Error (0x24) at 0x000000080000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x0000000E0000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x000007380000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x00000AD60000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x00000C320000 is Ignored. Erase continues. WARNING: Erasing Error (0x24) at 0x00000D6E0000 is Ignored. Erase continues. Completed in 00:00:07.860 (Average Transfer Rate: 33351.65 kB/s) repair boot. Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.34, JTAG Manager Version: 1.48 Selected Resurrector: [Samsung S5560i V1.00] Connecting to the dead body...OK Detected dead body ID: 0x07926F0F - CORRECT! Set I/O Voltage reads as 3.00V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x0040 (256MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Flashing the dead body...OK WARNING: Programming Error (0x24) at 0x000000080000 is handled as Cut Excess. WARNING: Programming Error (0x24) at 0x0000000E0000 is handled as Cut Excess. Resurrection complete!

12-10-2012, 14:17	#2 (permalink)
algerienbox No Life Poster Join Date: Sep 2007 Location: algeria Posts: 2,360 Member: 591880 Status: Offline Thanks Meter: 561	Code: WARNING: Erasing Error (0x24) at 0x00000D6E0000 is Ignored. Erase continues. RIFF JTAG Box FAQ - Error code 0x24

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-10-2012, 14:45	#3 (permalink)
meysam.karaji Registered User Join Date: Jul 2011 Location: IRAN-karaj Posts: 107 Member: 1613571 Status: Offline Sonork: 100.1615053 Thanks Meter: 57	Was tested But it did not solve the problem.