RIFF Box not connecting to any phone bought from Fonefunshop.co.uk

[atinder_2006]

I bought a riff box from fonefunshop.co.uk. I upgraded the box with the latest firmware and also soldered the wires properly I have pictures but riff box doesn't detect the phone. I contacted them and they said they'll test it before they will replace or refund me. I can't say about what they are till their final response but their policy is really not fair. How come they dont know if box was defective or not if they are shipping it to a different country where shipping costs too much.

Please product support team is there something you can do, like a test on the box.

Here is the video of the second phone I tried
https://www.box.com/shared/c83d6gxiqdaubdjn1t2w

[islamic.tj]

Originally Posted by atinder_2006

I bought a riff box from fonefunshop.co.uk. I upgraded the box with the latest firmware and also soldered the wires properly I have pictures but riff box doesn't detect the phone. I contacted them and they said they'll test it before they will replace or refund me. I can't say about what they are till their final response but their policy is really not fair. How come they dont know if box was defective or not if they are shipping it to a different country where shipping costs too much.

Please product support team is there something you can do, like a test on the box.

Here is the video of the second phone I tried
https://www.box.com/shared/c83d6gxiqdaubdjn1t2w

post log error here always...

[atinder_2006]

Originally Posted by islamic.tj

post log error here always...

Everything else was fine pinout was wrong. I have another problem now, after resurrection complete phone is still dead. Here is the log

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.34, JTAG Manager Version: 1.48
Selected Resurrector: [Samsung I535 V1.0.4717.59182]
Restarting target (nRST Low then High)...OK

Connecting to the dead body...OK
Detected dead body ID: 0x706B10E1 - IGNORED!
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x0003AB400000 Bytes = 14.68 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0000 (MAG4FB, 0x000000200000 Bytes = 2.00 MB)

Selected Resurrection Data for the eMMC Chip with Capacity = 14.68GB

Flashing the dead body...OK
Resurrection complete!

[islamic.tj]

after repair not enter download mode ?
try speed TCK 1 MHz - up to 8 MHz

[PhoneRose]

please help....new user riff

write flash on dcc tab not working

[Jacques2]

My RIFF box also displayed an incorrect pin out.
Here is what I used:
3 TDI
4 TRST
5 TCK
6 TMS
7 TDO
8 RTCK
10 NRST
12 GND

[PhoneRose]

Originally Posted by PhoneRose

please help....new user riff

write flash on dcc tab not working

solved, SETTING by code
sorry........

[shahidshan40]

i repaire bot htc desire or other model fewdays ago but not conect any fhone today yasterday i dont know whats wrong bcoz 1 fhone boot repare susses few day he custmer return my shop telling me phone dad again but phone not conect i try to x10i but same problom

plz help me

[IMG=http://img803.imageshack.us/img803/2121/rifferr.png][/IMG]

Uploaded with ImageShack.us

ImageShack® - Online Photo and Video Hosting

[email protected]
skype:shahidshan40
snoork:100.1614969

[CONCORDIA GSM]

make sure that connection wires well soldered.

[shahidshan40]

iam 100% sure all wire ok