RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair

[gsmshapon]

RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair


10.09.2012 RIFF JTAG – Samsung SGH-A887 Unbrick – Dead boot repair

The Samsung A887 board is auto powered on with USB Data Cable connected to the PC. Battery presence is not required; connection can be established with detached board.

To resurrect Samsung A887:
Solder JTAG cable to Samsung A887 JTAG pads;
connect USB cable;
Make sure Samsung A887 is selected in the list of models;
Click Resurrect button;
Wait till software signals a successful operation completion;
Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.

To enter download mode:
Disconnect PC cable;
Insert battery;
Hold both ‘Volume Down’ and ‘Camera’ keys and press ‘Power ON’ button.

thanks riff tem good updates