RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15 - Page 2 - GSM-Forum

samusprime · 11-11-2011, 20:41

hello, i downloaded ressurectors but software cant detected....

ERROR: The DLL was not accepted: "SE_E15a.dll"
ERROR: The DLL was not accepted: "SE_U20a.dll"
ERROR: The DLL was not accepted: "SE_U20i.dll"
ERROR: The DLL was not accepted: "SE_X10.dll"
ERROR: The DLL was not accepted: "SE_X10_Mini.dll"
ERROR: The DLL was not accepted: "SE_X8.dll"

some solution?

BABAK NURI · 11-11-2011, 22:54

download and install 1.28 firmware and 1.37 jtag-manager

littmanr · 11-12-2011, 00:40

It can does rebuild imei?

mobile. · 11-12-2011, 00:51

Yes

Sent from my xxx using Tapatalk.

sed_1982 · 11-12-2011, 03:34

Quote:

Originally Posted by samusprime

hello, i downloaded ressurectors but software cant detected....

ERROR: The DLL was not accepted: "SE_E15a.dll"
ERROR: The DLL was not accepted: "SE_U20a.dll"
ERROR: The DLL was not accepted: "SE_U20i.dll"
ERROR: The DLL was not accepted: "SE_X10.dll"
ERROR: The DLL was not accepted: "SE_X10_Mini.dll"
ERROR: The DLL was not accepted: "SE_X8.dll"

some solution?

install latest jtag manger and firmware

ssatcom · 11-12-2011, 09:50

Thanks RIFF Team.........

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE E15i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

fan_matrix2 · 11-12-2011, 18:55

after unlock i have probleme with network ,
i must flash phone or ,i repet the procedure ?

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE E15i]
Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB
Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

jhon357add · 11-12-2011, 23:39

Only Repair Imei Put Original Imei and get Done Ok

fan_matrix2 · 11-13-2011, 10:00

imei not change after unlock ,i flash it ?

chliki2001 · 11-13-2011, 10:25

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE E15i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

BUT NO SIGNAL
I REPEAT OPERATION

chliki2001 · 11-13-2011, 10:27

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE E15i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Phone is not Locked.

WHERE IS THE PROBLEM IM VERRY CONFUSED

delux_gsm · 11-13-2011, 10:34

Quote:

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE U20i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

thanks riff team ...........................

Faheem Anjum · 11-13-2011, 12:58

Quote:

Originally Posted by fan_matrix2

imei not change after unlock ,i flash it ?

i am online on sonork ,yahoo so contact me to repair it

xploremanoj · 11-13-2011, 13:11

where can i get RIFF and wats the cost of it

moh_boulk17 · 11-13-2011, 14:20

i have E15 i can unlock with riffbox

11-12-2011, 09:50	#21 (permalink)
ssatcom No Life Poster Join Date: Oct 2002 Location: Satcom Bangalore INDIA Age: 53 Posts: 911 Member: 17098 Status: Offline Thanks Meter: 51	E15i Unlock Done Thanks RIFF Team......... Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE E15i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete!

11-13-2011, 14:20	#30 (permalink)
moh_boulk17 No Life Poster Join Date: Jan 2006 Location: algeria Posts: 1,476 Member: 217891 Status: Offline Thanks Meter: 237	i have E15 i can unlock with riffbox i have E15 i can unlock with riffbox

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-06-2012 16:22
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44

11-11-2011, 20:41	#16 (permalink)
samusprime No Life Poster Join Date: Oct 2005 Location: .:Planet Namek:. Posts: 1,121 Member: 189984 Status: Offline Thanks Meter: 112	hello, i downloaded ressurectors but software cant detected.... ERROR: The DLL was not accepted: "SE_E15a.dll" ERROR: The DLL was not accepted: "SE_U20a.dll" ERROR: The DLL was not accepted: "SE_U20i.dll" ERROR: The DLL was not accepted: "SE_X10.dll" ERROR: The DLL was not accepted: "SE_X10_Mini.dll" ERROR: The DLL was not accepted: "SE_X8.dll" some solution?

11-11-2011, 22:54	#17 (permalink)
BABAK NURI Product Supporter Join Date: Mar 2005 Location: Tehran.IR Age: 43 Posts: 7,259 Member: 131131 Status: Offline Sonork: 100.1606847 Thanks Meter: 4,475	download and install 1.28 firmware and 1.37 jtag-manager

11-12-2011, 00:40	#18 (permalink)
littmanr No Life Poster Join Date: Oct 2005 Posts: 668 Member: 190377 Status: Offline Thanks Meter: 61	It can does rebuild imei?

11-12-2011, 00:51	#19 (permalink)
mobile. Freak Poster Join Date: Nov 2010 Location: UK Posts: 449 Member: 1454100 Status: Offline Thanks Meter: 28	Yes Sent from my xxx using Tapatalk.

11-12-2011, 18:55	#22 (permalink)
fan_matrix2 Freak Poster Join Date: Feb 2006 Location: algeria Posts: 121 Member: 235280 Status: Offline Thanks Meter: 11	after unlock i have probleme with network , i must flash phone or ,i repet the procedure ? Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE E15i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete!

11-12-2011, 23:39	#23 (permalink)
jhon357add Freak Poster Join Date: Jan 2009 Location: MoviL GsM Age: 38 Posts: 425 Member: 949016 Status: Offline Sonork: 161.7672 Thanks Meter: 25	Only Repair Imei Put Original Imei and get Done Ok

11-13-2011, 10:00	#24 (permalink)
fan_matrix2 Freak Poster Join Date: Feb 2006 Location: algeria Posts: 121 Member: 235280 Status: Offline Thanks Meter: 11	imei not change after unlock ,i flash it ?

11-13-2011, 10:25	#25 (permalink)
chliki2001 Freak Poster Join Date: Jul 2005 Age: 54 Posts: 259 Member: 166398 Status: Offline Thanks Meter: 21	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE E15i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete! BUT NO SIGNAL I REPEAT OPERATION

11-13-2011, 10:27	#26 (permalink)
chliki2001 Freak Poster Join Date: Jul 2005 Age: 54 Posts: 259 Member: 166398 Status: Offline Thanks Meter: 21	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE E15i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Phone is not Locked. WHERE IS THE PROBLEM IM VERRY CONFUSED

11-13-2011, 13:11	#29 (permalink)
xploremanoj Junior Member Join Date: Oct 2010 Posts: 7 Member: 1422162 Status: Offline Thanks Meter: 0	where can i get RIFF and wats the cost of it