RIFF JTAG – Unlock/IMEI/TA repair – SonyEricsson x8, x10, x10 Mini, x10 mini pro (e15 - Page 3 - GSM-Forum

mobile_hotman · 11-13-2011, 14:23

Quote:

Originally Posted by moh_boulk17

i have E15 i can unlock with riffbox

Bro is it an information or question ?

BR

moh_boulk17 · 11-13-2011, 14:30

Quote:

Originally Posted by mobile_hotman

Bro is it an information or question ?

BR

this information if riffbox can unlock i bay riff box now and how know new bootrom or old bootrom

mobile_hotman · 11-13-2011, 14:33

If new bootrom not possible at the moment old yes ofcourse u can unlock,,,n can see in the section already unlocked,,,,

BR

reda86 · 11-13-2011, 14:38

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE U20i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!
thank s riff gooood work

moh_boulk17 · 11-13-2011, 14:47

Quote:

Originally Posted by mobile_hotman

If new bootrom not possible at the moment old yes ofcourse u can unlock,,,n can see in the section already unlocked,,,,

BR

but how know new bootrom or old bootrom

mobile_hotman · 11-13-2011, 15:08

Bro Old BootRom will unlock,,if gives an error it measn its new bootrom,,,further more Sir, Lagija can tell us better.

BR

evasoft · 11-13-2011, 20:52

repair and change?
thnks

TheFastUnlocker · 11-13-2011, 21:09

yes it can unlock and repait
so we need ipmart to make good jtag without soldring only connect and clik unlock lol

lgarapo · 11-13-2011, 21:22

After unlock by riff no network seen other post with same problem
Any solution

oxygene31dz · 11-13-2011, 21:26

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE E15i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

after resurection phone hang whith sim , if do airplane mode , phone is normaly ???????,
please Mr "" RIFF "" you can give an solution .

Saulcell · 11-13-2011, 22:15

try flash the phone with any version 2.1.x

moinuddin111 · 11-14-2011, 02:13

my xperia x10 mini pro u20i unlock done with riff box

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.28, JTAG Manager Version: 1.37
Selected Resurrector: [SE U20i]

Connecting to the dead body...OK
Detected dead body ID: 0x203C00E1 - CORRECT!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK

Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB)
Selected Resurrection Data for the NAND Chip with Page size = 2KB

Backup Important Zones...OK
Preparing data. Please wait...OK
Unlocking the Phone...OK
Unlock complete!

thanks
riff team

moinuddin111 · 11-14-2011, 02:15

thanks
the phone is unlocked by your trick

vesz · 11-14-2011, 10:05

What to do in case that phone has no network ?

- Connect phone to RIFF Box
- Select model
- Click "Resurrection"
- Tick "Repair TA Zone"
- Enter valid IMEI
- Click "Resurrect"

chliki2001 · 11-14-2011, 11:02

Quote:

Originally Posted by vesz

What to do in case that phone has no network ?

- Connect phone to RIFF Box
- Select model
- Click "Resurrection"
- Tick "Repair TA Zone"
- Enter valid IMEI
- Click "Resurrect"

U CANT DO THIS BY RIFF IT GIVE U ERROR I DO IT FOR E15I I HV THE SAME PROBLEM? NO NETWORK
AND TO REPAIR TA ZONE ANND IMEI NO THINK DO
I THINK ITS A BETA RELEASS FROM LIGIGA
http://forum.gsmhosting.com/vbb/f634...-1379836/:mad:

11-13-2011, 21:22	#39 (permalink)
lgarapo Freak Poster Join Date: Apr 2006 Location: harare zimbabwe Posts: 316 Member: 255977 Status: Offline Thanks Meter: 24	X10 problem with network after unlock After unlock by riff no network seen other post with same problem Any solution

11-13-2011, 21:26	#40 (permalink)
oxygene31dz Freak Poster Join Date: Jul 2006 Age: 38 Posts: 178 Member: 304160 Status: Offline Thanks Meter: 12	e15i hang after unlock !!!! Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE E15i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete! after resurection phone hang whith sim , if do airplane mode , phone is normaly ???????, please Mr "" RIFF "" you can give an solution .

11-14-2011, 02:13	#42 (permalink)
moinuddin111 No Life Poster Join Date: Sep 2008 Location: in your hart Age: 40 Posts: 745 Member: 864102 Status: Offline Sonork: 100.1617637 Thanks Meter: 146	my xperia x10 mini pro u20i unlock done my xperia x10 mini pro u20i unlock done with riff box Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE U20i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x00EC/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete! thanks riff team

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unlocking 5190	Ryu	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	23	01-07-2018 17:14
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-06-2012 16:22
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44

11-13-2011, 14:33	#33 (permalink)
mobile_hotman No Life Poster Join Date: Dec 2005 Location: IN_BATTLE_FIELD. Posts: 3,224 Member: 214340 Status: Offline Thanks Meter: 906	If new bootrom not possible at the moment old yes ofcourse u can unlock,,,n can see in the section already unlocked,,,, BR

11-13-2011, 14:38	#34 (permalink)
reda86 No Life Poster Join Date: Oct 2008 Age: 38 Posts: 614 Member: 882614 Status: Offline Sonork: 100.1608795 Thanks Meter: 141	Open serial port...OK Connecting to the RIFF Box...OK Firmware Version: 1.28, JTAG Manager Version: 1.37 Selected Resurrector: [SE U20i] Connecting to the dead body...OK Detected dead body ID: 0x203C00E1 - CORRECT! Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK Adaptive Clocking RTCK Sampling is: [Sample at MAX] Resurrection sequence started. Establish communication with the phone...OK Initializing internal hardware configuration...OK Uploading resurrector data into memory...OK Starting communication with resurrector...OK Detected an Initialized FLASH1 Chip, ID: 0x0020/0x55BC (512MB) Selected Resurrection Data for the NAND Chip with Page size = 2KB Backup Important Zones...OK Preparing data. Please wait...OK Unlocking the Phone...OK Unlock complete! thank s riff gooood work

11-13-2011, 15:08	#36 (permalink)
mobile_hotman No Life Poster Join Date: Dec 2005 Location: IN_BATTLE_FIELD. Posts: 3,224 Member: 214340 Status: Offline Thanks Meter: 906	Bro Old BootRom will unlock,,if gives an error it measn its new bootrom,,,further more Sir, Lagija can tell us better. BR

11-13-2011, 20:52	#37 (permalink)
evasoft Freak Poster Join Date: May 2007 Posts: 498 Member: 515830 Status: Offline Thanks Meter: 80	repair and change? thnks

11-13-2011, 21:09	#38 (permalink)
TheFastUnlocker Junior Member Join Date: Nov 2011 Posts: 3 Member: 1687699 Status: Offline Thanks Meter: 0	yes it can unlock and repait so we need ipmart to make good jtag without soldring only connect and clik unlock lol

11-13-2011, 22:15	#41 (permalink)
Saulcell No Life Poster Join Date: May 2006 Location: The_Colombian_Team ! Posts: 802 Member: 278939 Status: Offline Sonork: 100.1593095 Thanks Meter: 382	try flash the phone with any version 2.1.x

11-14-2011, 02:15	#43 (permalink)
moinuddin111 No Life Poster Join Date: Sep 2008 Location: in your hart Age: 40 Posts: 745 Member: 864102 Status: Offline Sonork: 100.1617637 Thanks Meter: 146	thanks the phone is unlocked by your trick

11-14-2011, 10:05	#44 (permalink)
vesz Freak Poster Join Date: Jul 2004 Age: 43 Posts: 133 Member: 73792 Status: Offline Thanks Meter: 61	What to do in case that phone has no network ? - Connect phone to RIFF Box - Select model - Click "Resurrection" - Tick "Repair TA Zone" - Enter valid IMEI - Click "Resurrect"